So simple!

Compared with other coatings, the structure of water-in-water colorful paint is very complicated.
The complete water-in-water coating includes a composite coating formed by multiple functional coatings such as a primer layer, a middle coat, a main material layer, and a top coat layer.
Judging the quality of a colorful paint can not completely rely on a single surface workmanship, combined with a comprehensive inspection of each process can draw the most accurate conclusion.

Primer and topcoat are the two major surface coatings of water-in-water colorful coatings, which play a very important role in the overall adhesion and protection of the coating.

1.
Adhesion: The firmness of the paint film to the substrate is the adhesion.
Generally, the hundred grid method is used, and the adhesion is determined according to the degree of damage to the coating.

2.
Hardness: Hardness mainly refers to the resistance of the paint film against foreign objects.
The conventional test takes the Chinese pencil as the standard, and the hardness that can scratch the paint film is the critical hardness.
Generally, the paint film must reach at least HB hardness, excellent The paint film can reach 2H hardness com" href="http://">coating online coatingol.
com .

3.
Filling: An important feature of the primer is that it can fill small cavities on the exterior surface, which can generally be judged by the comparison method.
The high-quality filling performance can effectively reduce the number of primers and save materials.

4.
Dryness: The paint film feels sticky when touched with your fingers, but it can be judged as dry if you don't touch the hand.
If you press hard on the surface of the paint film, it will not leave indentation or damage to the paint film, and it can be judged as dry by finger pressure.

5.
Yellowing resistance: The yellowing resistance actually refers to the weather resistance.
When the alkaline exterior surface or direct contact with the air, the sulfur, benzene ring and other chemical substances in the coating react, and the paint film is prone to yellowing , Falling off phenomenon, mainly investigating weather resistance time.

Medium coating

The middle coating generally refers to the latex paint standard, the main

To investigate tensile properties, aging resistance, and scrubbing resistance

As well as alkali and water resistance.

Main material layer

The main material layer refers to the color layer of the water-in-water colorful paint.

Appearance: Water-in-water colorful paint is mainly used to imitate granite stone.

Constructability: paint pays attention to three divisions of materials and seven divisions of labor, no matter how good the materials are, the construction is in vain.
Different manufacturers have different material performance and quality, some are easy to construct and some are difficult to construct.
Of course, the colorful paint that costs labor and materials is not high-quality.

Stability: Water-in-water colorful paint itself is unstable.
Different manufacturers have different product shelf life.
Some projects with large engineering volume and long construction period have special requirements for the storage stability of colorful paint.
Generally, the storage time is less than 2 weeks.
Can be classified as inferior products.

Material consumption: The water-in-water colorful paint mainly relies on the irregularly scattered color points to form a granite effect.
The amount of the main material required for the imitation stone pattern is also different.
The average dosage is generally about 0.
25-0.
55.
When imitating the same pattern, the spraying effect is basically the same, so the smaller the amount of material, the better.

Matters needing attention in colorful paint construction

June to September of each year is the peak season for the construction of water-in-water colorful paints.

1.

2.

3.

4.