-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
-
Cosmetic Ingredient
- Water Treatment Chemical
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
The high and low temperature circulation device of Wuxi Guanya Laboratory is the equipment required by the metal, plastic, electronic and other material industries.
It has a very wide temperature control range and is suitable for the constant temperature control needs of most enterprises
.
1.
Placement position: it cannot be installed upside down, it needs to be placed horizontally on the floor, so that the door of the box can be opened easily and reduce the noise during mechanical action
.
2.
Placement environment: It is necessary to maintain a good ventilation space, so that the condenser can play the role of heat dissipation
.
And avoid direct sunlight, and do not get close to heating objects such as stoves, so as not to affect the effect
.
3.
The power switch of the laboratory high and low temperature cycle device needs a special switch.
Do not use the flexible cord of the plug with other electrical machinery.
Do not place it on the floor or in a damp place to avoid stepping on it or leaking electricity
.
There should be a transformer at the low power supply voltage to increase the voltage to the rated value, so as not to burn the compressor motor because the voltage is too low to start
.
4.
Protective cleaning: It should be kept clean at all times.
When the outer box is clean, you can apply some varnish and polish it with a soft dry cloth.
If it is too dirty, wash it with neutral lotion and water, and never use a brush.
Powder, acid, benzene oil or hot water, etc.
to wipe the inside and outside of the machine, dust is easy to be covered on the back or between the walls, and the heat dissipation of the condenser should be prevented from time to time
.
If the model is water-cooled, special attention should be paid to the treatment of water quality, and the use of groundwater should be avoided as much as possible.
Because groundwater contains many minerals, it is easy to produce scale, which affects the cooling effect and reduces the life of the machine
.
