Small knowledge of using fluid refrigeration heating circulator

1.
The outer packing box of the fluid refrigeration heating circulator shall not be assembled during the loading and unloading process.
When handling, avoid vibration and collision, and handle it carefully so as not to damage the equipment and items in the packing box; 2.
After unpacking, a special person should keep the random items.
, and check whether the equipment and items in the packing box are consistent with the packing list; 3.
During the installation process, first check whether the various parts of the heating and cooling machine are complete, and reconfirm the performance indicated on the nameplate of the heating and cooling machine.
Whether the parameters can meet the requirements; 4.
When the explosion-proof fluid refrigeration heating circulator is leaking, the leakage protector equipped with the equipment will be cut off in time
.

5.
When the compressor of the explosion-proof fluid refrigeration heating circulator is faulty, the power supply should be checked first.
If the power supply is normal, we need to arrange the switch and temperature settings.
If there is no abnormality, check whether the circuit is missing phase and whether the relay is damaged; 6.
If In the event of a power failure during use, the switch of the explosion-proof fluid refrigeration and heating circulator should be closed first, and then the power supply should be disconnected; Direct heat conduction
.

8.
It is recommended to select the heat transfer oil as the second choice to master its characteristic parameters, and select the corresponding temperature range and model
.

Within the scope of use, the vapor pressure is not high, and the volatilization loss rate is low.
It is necessary to choose a heat transfer oil with excellent thermal conductivity, circulation and pumpability
.