-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
-
Cosmetic Ingredient
- Water Treatment Chemical
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
1.
The dust particle counter is mainly used to test the clean environment of the purification workshop.
When there are loose particle materials, dust sources, and spray places in the measurement place, it must be kept at least twelve inches away from the inlet pipe
.
In order to prevent the above particles and liquid from contaminating the sensor and pipeline
.
2.
When sampling, avoid sampling the gas discharged from the counter itself or polluted by the gas from the counter
.
3.
When connecting an external printer or an external temperature and humidity sensor, turn off the counter first; when performing printing operations, there must be printing paper on the printer, otherwise the print head will be damaged
.
4.
Do not sample compressed air without a high pressure decompression device (such as a high pressure gas diffuser).
All particle counters are designed to operate at one atmosphere
.
5.
Water, solutions or other liquids cannot enter the sensor from the inlet pipe
.
6.
Do not start the instrument when the inlet tube is capped or blocked
.
7.
The laser dust particle counter should be used in a clean environment to prevent damage to the laser sensor
.
8.
Do not measure the mixed gas that may produce a reaction to prevent the gas from exploding in the counter
.
