-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
-
Cosmetic Ingredient
- Water Treatment Chemical
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
In the process of using the biochemical incubator, if the incubator does not "refrigerate", there are generally four faults as follows: 1.
The position of the transfer switch is incorrect; 2.
The compressor is broken or the pipeline is blocked or R12 is leaking; 3.
Biochemical The compressor overheat protector of the incubator is activated; 4.
The compressor protector is burnt out (with burnt smell)
.
There are several corresponding methods to eliminate and solve the above 4 points: 1.
The position of the switch of the biochemical incubator is incorrect; treatment method: set the correct position; 2.
The compressor is broken or the pipeline is blocked or R12 is leaking; treatment method: Change, remove blockage, and add R123.
The compressor overheat protector of the biochemical incubator starts; treatment method: wait for the temperature of the compressor to drop, and restore it naturally.
4.
The compressor protector is burnt out (with burnt smell)
.
Treatment method: replace the protector
.
The position of the transfer switch is incorrect; 2.
The compressor is broken or the pipeline is blocked or R12 is leaking; 3.
Biochemical The compressor overheat protector of the incubator is activated; 4.
The compressor protector is burnt out (with burnt smell)
.
There are several corresponding methods to eliminate and solve the above 4 points: 1.
The position of the switch of the biochemical incubator is incorrect; treatment method: set the correct position; 2.
The compressor is broken or the pipeline is blocked or R12 is leaking; treatment method: Change, remove blockage, and add R123.
The compressor overheat protector of the biochemical incubator starts; treatment method: wait for the temperature of the compressor to drop, and restore it naturally.
4.
The compressor protector is burnt out (with burnt smell)
.
Treatment method: replace the protector
.
