Safety operation rules for automatic sampling tube filling machine

The automatic sampling tube filling machine improves the production efficiency of our enterprise and increases the production scale of the enterprise
.

We also cannot ignore the importance of safe operation during production operations.
Many news reports of factory explosions, fires, casualties and other incidents have to make us reflect on the importance of safe operation
.

Today, Shanghai Shenggang will sort out the safety operation rules of the automatic sampling tube filling machine for you
.

1.
Basic parameters of the automatic sampling tube filling machine: 1.
Inspection before use: After the machine is installed, turn on the power supply, test the three-phase motor, ensure the correct running direction, ensure the pressure and flow of compressed air, check the motor, Whether it is necessary to add lubricating oil to the bearings, etc.
, it is strictly forbidden to run without oil, and the machine can be started only after normal operation.
At the same time, observe whether the fasteners of each part are loose.
After the operation of each part is stable, it can be used normally; 2.
Check whether the safety facilities function 3.
Before starting the machine, carefully check whether there is water in all the water tanks, whether the chain plates are stuck, whether there are sundries on the conveyor belt, whether there are bottle caps in the lid box, whether there are several buckets of water, power, and gas sources, wait for each item After you press Ready, turn on the main power, the power indicator is on, the fault indicator and the emergency stop indicator are not on, then the starting conditions are met, press the start button on the control box and the start switch at the filling place, and the bee After three beeps of warning, the whole machine starts running and enters the fully automatic working mode of external washing, rinsing and filling.
When the machine stops, press the stop button at the filling place and the control box to shut down the main power supply
.

2.
Safety rules for the use of the automatic sampling tube filling machine: 1.
There are no foreign objects (such as tools, rags, etc.
) in the liquid filling machine equipment; 2.
The liquid filling machine is not allowed to have abnormal noise 3.
All protective objects should be safe and reliable, and it is strictly forbidden to wear foreign objects that may be caught by moving parts (such as scarves, bracelets, watches, etc.
); 4.
Operators with long hair should wear a hair cover; 5.
Do not Clean the electrical unit with water and other liquids; 6.
Wear work clothes, gloves, and eyes when cleaning to prevent corrosion by strong acid and alkali; 7.
When it is running, someone must monitor it, and do not use tools or other objects to approach the machine; 8 , Do not let people who have nothing to do with the operation approach the equipment
.

 　　3.
Maintenance and maintenance of the automatic sampling tube filling machine: 1.
Regular inspection and maintenance: The starting components such as air cylinder, solenoid valve, speed control and electrical parts should be checked every month
.

The inspection method can be checked by manual adjustment to check the quality and reliability of the action.
The cylinder mainly checks for air leakage and jamming.
The solenoid valve can be manually forced to act to check whether the solenoid coil is burnt and the valve is blocked.
The electrical part may be input by comparison.
Output signal indicator light to check, such as checking whether the switching element is damaged, whether the line is disconnected, and whether each output element is working normally
.

 　　2.
Routine construction and maintenance: whether the motor is running normally, whether the safety environment is normal, and whether the cooling system is abnormal
.

Whether there is abnormal vibration, abnormal sound; whether there is abnormal overheating or discoloration
.

 　　4.
Precautions for the automatic sampling tube filling machine: 1.
The motor and the casing must be grounded, and the zero line and the bottom line must be separated; 2.
The power supply line of the machine must be introduced through the leakage switch; 3.
The three pneumatic components require pneumatic Special lubricating oil is used to prolong the service life of the cylinder; 4.
Water and mercury are strictly forbidden to operate without water.
During the operation, pay attention to replenishing water in the alkaline water tank and the disinfection water tank, and at the same time ensure the supply of cleaning water; 5.
Automatic sampling tube filling machine Equipment cleaning requirements: 1.
Clean the nozzles, pipes, conveyor belts and water tanks of the equipment before and after work every day; 2.
Clean the filling equipment and pipes with disinfectant water every week, and then use the process after disinfection.
3.
The operator should record and save the disinfection and cleaning process
.