Rheosinizer RHIOVIS HS1332/1212/1152.

. RHEOVIS HS1332/1212/1152
Product Overview: RHEOVIS HS1332/1212/1152 is an efficient rheative aid for water-based coatings and ink systems with a wide range of applications.typical physical characteristics (typical physical characteristics are references to product physical data provided by suppliers to users or potential users,
should not be used as a testing standard for product eligibility
<4>RHEOVIS HS1332/1212/1152 is an ideal
rheumor agent widely used in water-based coatings and water-based ink systems, with the best pH range ranging from 7.5-10.0.
specific choice of RHIOVIS HS1332/1212/1152 should be subject to different circumstances and requirements.in systems where denaturation is more demanding, we recommend using ANOTHER highly effective rheative aid, RHEOVISAS1130.
the RHEOVIS HS1332/1212/1152 are very compatible and can be mixed in the formulation at any rate. In a given formula, adjust the amount of these three products for optimal use.
Because RHIOVIS HS1332/1212/1152 is chemically synthesized, microorganisms have a much smaller impact on them than fiber derivatives, so they can reduce the amount of fungicides in formulations and apply a wider range of applications.In use
the fluid modifier of the joint thickener should be added at the last step of coating or ink production, rather than during pigment grinding, which avoids instability at high shear forces and also helps to regulate the viscosity of the coating to meet the needs of different products.
because RHIOVIS HS1332/1212/1152 is a liquid, it is very convenient to add later.
the rheumogenic aid, the alkaline substance or ammonium is added to adjust the pH to achieve the desired viscosity. The use of volatile alkaline substances can improve the water resistance of dry film.
in the production process, the pH of the coating system should always be greater than 7.5 to prevent subsidion and the resulting instability. In some cases, it is recommended to dilute the fluidizer and pre-glue it with alkaline substances before adding it. The recommended dilution factor is one additive plus five servings of water.the optimal
should be determined experimentally under different conditions.
recommended dosing: 1.0-3.5% .