Reasons for uneven slices of medicinal material slicer

We all know that some medicinal materials need to be sliced ​​before being produced and sold, such as Banlangen tablets, licorice tablets, American ginseng tablets,
etc.

At this time, the medicinal material slicer played a great role in it, but no matter how good the machine is, if it is used improperly, there will be problems
.

For example, the machine slices unevenly.
In this issue, the editor will explain to you some common reasons for uneven slices of medicinal material slicers
.

Reasons for uneven slicing of medicinal material slicing machine 1.
Reasons why the motor does not run after power-on: (1) The power supply is not in good contact or the plug is loose (2) The switch is in poor contact.
Maintenance methods: (1) Repair the power supply or replace the plug; (2) Repair Or change the switch of the same specification.
2.
The slicing is uneven, dull, and there are many reasons for the generation of powder: (1) the blade is not sharp; (2) the hardness of the sliced ​​material is too high; (3) the sticky juice of the sliced ​​material sticks the blade; ( 4) Maintenance methods for uneven force: (1) Remove the blade and sharpen it with a grindstone; (2) Bake the sliced ​​material until soft; (3) Remove the blade and grind off the sticky juice; (4) Use even force when slicing 3.
When working, the motor stops rotating.
Reasons: (1) Too much material feeds the cutter head; (2) The switch is not in good contact.
Maintenance methods: (1) Look down at the cutter head and take out the stuck material; (2) The switch touches Click to adjust or swap the switch
.