-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
-
Cosmetic Ingredient
- Water Treatment Chemical
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
PTC heater Chiller is divided into water-cooled and air-cooled, although it is said to be used for cooling, but different types of working principles are different, and the user groups used are different, so do you understand the correct operation of this type of equipment? 1.
The correct starting sequence of PTC heater Chiller should be: first open the chilled water pump, then turn on the cooling water pump, after the two water circulation systems are running normally, then press the start button on the control board of the chiller, and the compressor will automatically start in order after three minutes; 2.
When using the air-cooled cryogenic freezer chiller, the refrigeration compressor can only be started after the frozen water system and the cooling water system are running normally; 3.
Do not adjust the freezing water temperature of the industrial chiller too low, and adjust the frozen water temperature of the chiller as high as possible under the premise of meeting the requirements of use; 4.
The operator can overhaul and maintain the compressor according to the actual use of the industrial chiller hours, and can run one refrigeration circuit and stop another circuit for maintenance; 5.
If it is not an emergency, the industrial chiller should not be turned off by cutting off the main power supply; If short-term downtime is required (less than 7 days) 6.
Check some supervision of the condenser every three months, disassemble one end of the condenser tube, and clean all the inside of each copper tube with a washing brush
.
In addition, PTC heater Chiller should also pay attention to pulling down the main gate of the power supply after maintenance in the actual maintenance process to avoid the shortening of the life of the power supply parts due to long-term standby, so in actual use, you can maintain by stopping
.
TCU temperature control unit Chiller maintenance benefits Then, from other aspects, checking and maintaining the TCU temperature control unit Chiller has the following many benefits, let's follow the editor to understand it
together.
