Pses balance LS/LT/LX series fault codes and solutions

Electronic balances are precision instruments used only in dry, stable interiors and placed on solid, firm and shock-proof water platforms where excessive fluctuations in airflow and temperature may cause weighing instability
.

This article shares the Plyses balance LS/LT/LX series fault codes and solutions
.

1, the display is not on ● The balance is not turned on ● The power adapter is disconnected ● There is no power supply (current interruption) ● The power adapter is faulty 2, the display "OL" ● The range is exceeded 3, the "UL" is displayed ● The range is below the range (the weighing pan or weighing pan support is missing) 4, the weight display has been fluctuating ● The airflow at the balance position is large ● The balance support vibrates or the position has been changing ● The weighing pan touches a foreign body ● The floating display selects too short ● The so-called sample absorbs moisture ● The alleged sample is volatilizing or evaporating ● The temperature of the alleged sample is changing greatly5, the weighing result is incorrect ● The balance is not properly peeled to zero ● The balance is not leveled ● Calibration error ● Temperature fluctuates violently6, no display or only a section (————) ● The stability setting is too sensitive (balance function) ● The floating display selection time is not appropriate7, the configuration menu cannot be changed ● The password protection in the configuration menu is activated 8, the display has been flashing during calibration ● The balance placement point is not stable enough (calibration is interrupted with the power key, Then reposition the balance to a better balanced position) ● The calibration weights used are not accurate (external calibration only) and their possible causes are listed
in the table below.

If you cannot clear the fault error through this table, please contact us