Process description of gel filling and labeling machine

Equipment process description of gel filling and labeling integrated machine: 1.
General conditions and materials: 1) Made of stainless steel and aluminum alloy materials
.

2) The main body adopts welded structure to meet food-grade packaging requirements
.

3) The use of stainless steel can withstand normal wear, penetration of insects, corrosion of food, and retention of dirt, etc.
; and will not bring unpleasant smell, color and taste to the product, nor contaminated product
.

4) The material should be brand new, free from rust, loose rolling chips, dust, and free from pests, rodents,
etc.

5) All paints, surface coatings, topcoats and lubricants are lead free
.

 　　6) All controls, meters or measuring devices are free of mercury
.

 　　7) Use non-breakable materials where glass is normally used for all equipment parts
.

 　　8) All equipment solder should be non-toxic and corrosion-resistant silver solder
.

 　　9) Asbestos and any compounds containing asbestos, mercury or glass should not be used
.

 　　10) Any copper or brass material should not be in contact with the product.
11) The upper part of the conveyor belt before the capping adopts a plexiglass dust cover to prevent dust
.

 　　2) The equipment can work under the on-site conditions specified by your company
.

 　　3) The power supply is 380V, 1 phase, 50Hz
.

 　　4) The control voltage is 24 VDC, which is in line with the electricity standard of the safety zone
.

 　　5) Regarding the priority conditions such as hardware and manufacturer, safety standards such as CE have been referred to
.

 　　6) Wire markings and terminal block markings are permanent markings and refer to Chinese electrical engineering standards
.

 　　7) Nameplates, legends and labels are permanent marks and refer to Chinese electrical engineering standards
.

 　　8) The types of pipes and wires used have been referred to the Chinese electrical engineering standards
.

 　　9) The equipment has the necessary wiring and interlocking system, and the access door and access cover are interlocked in accordance with the standard safety
.

 　　10) There is a control power supply in the control panel and is separated from the main power supply
.