Precautions for operating a small corrosion-resistant test chamber

Imported PVC improves hard plastic sheet, the surface is smooth and smooth, and anti-aging, anti-corrosion; Removing FRP materials should cause the surface fading fibrosis process
.
The all-plastic structure salt spray test chamber can consider long-term strong alkali and strong salt spray testing without causing all damage
.
The cover is produced by an open imported impact plate, which is conducive to observing the test condition of the experimental specimen during the
experiment.
The lid and housing are water-sealed to avoid corrosion leakage
.
Precautions for the safe operation of small corrosion resistance test chamber: 1.
The casing of the environmental test chamber must be grounded when installing, if the environmental test chamber does not have a grounding device, if the power is run, there will be a risk of
high-voltage electric shock traffickers.
2.
It is not necessary to operate the machinery and equipment
before it is installed.
3.
Ensure that the installation is reliable before carrying out the experiment
.
4.
Before applying the environmental test chamber, please carefully read the safety regulations in the instructions and the safety marks
on the machinery and equipment.
5.
After the experimental work is completed, when the environmental test chamber is not needed, try to turn off the main electric switch to prevent lightning strikes and other other conditions
.
6.
If the hot test piece is placed in the box, please apply another switching power supply to the test piece to manipulate the switching power supply, and do not need to apply the switching power supply
of the machine immediately.
7.
Move the environmental test chamber when there is a test piece in the warning, otherwise the test piece will flip or fall
.
8.
The environmental test chamber must be installed horizontally, otherwise it will cause alarm or unstable
operation.