Precautions for long-term operation of thermostatic shaker

Constant temperature shaker with stainless steel universal fixture, digital display temperature control, stepless speed regulation and good thermal circulation function, is a multi-purpose biochemical device, is plant, biological, microbial, genetic, virus, environmental protection, medicine and other scientific research, education and production departments for precision cultivation and preparation of laboratory equipment
.

The constant temperature shaker of the horizontal thermostatic shaker should pay attention to the matters that should be paid attention to for a long time: 1, the constant temperature shaker should be placed horizontally on the plane, if it is not flat, it will make an abnormal sound, and accelerate the shaft failure of the constant temperature shaker, or even break
.

2.
In the process of operation, if the flask beaker is damaged, the shaker should be stopped immediately, and the broken fragments and liquids should be removed in time, and the acid and alkaline liquid will corrode the shaker cavity, and the flow into the motor will cause short circuit, burn loss and other serious consequences
.

3.
In the operation of the constant temperature shaker, please do not move
at will.

It is strictly forbidden to put your hand or object into the wall of the chamber during operation, so as not to hurt people and damage equipment
.

4.
In order to dissipate heat in time during operation, please dissipate heat behind the instrument at least 10CM from the
wall.

5.
In the process of use, if any problem occurs, please communicate with the manufacturer in time and do not disassemble
it privately.

6.
The periphery of the constant temperature shaker should be kept clean and dry, and should not be directly sunburned
.

Reasons why the constant temperature shaker does not run: The solution to the non-operation of the constant temperature shaker 1, check whether the constant temperature shaker is energized; 2.
Whether the control panel is displayed correctly; 3.
Whether the belt on the roller of the constant temperature shaker motor is broken, please replace it in time; 4.
Whether the motor has been damaged; 5.
Whether the starting capacitor has been damaged is the case that the constant temperature shaker needs to shake the hand to shake normally, and it can be basically confirmed that the starting capacitor has been damaged
.

The larger the capacitance, the smaller the impedance