-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
-
Cosmetic Ingredient
- Water Treatment Chemical
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
The chemical high and low temperature circulation system also has the function of heating and cooling, the temperature range is -120°C-200°C, and the cooling power can be customized according to customer needs.
It is recommended to understand the functional knowledge of each system before use
.
The chemical high and low temperature circulation system refers to the large heating output power of the system.
The heater has triple protection and an independent temperature limiter to ensure the heating system.
The power is greater than 15KW using a voltage regulator, and the heating power output control adopts linear control
.
Refrigeration capacity refers to the ability to remove heat at different temperatures, which is very important.
Only high-performance refrigeration and heating equipment can provide better operating results
.
The whole system of chemical high and low temperature circulation system is a fully closed system, there will be no oil mist at high temperature, and no moisture in the air will be absorbed at low temperature
.
The quotations of the chemical high and low temperature circulation systems in the whole factory are different, the system pipelines are also different, and the operating effects are also different
.
The operation panel of the chemical high and low temperature circulation system, LNEYA customized 7-inch color touch screen, the temperature curve display \ EXCEL, and data can be exported
.
When the chemical high and low temperature circulation system fails and alarms and shuts down, first press the stop button (the alarm light will go out), and then check the cause of the failure
.
Before using the reaction kettle of the chemical high and low temperature circulation system, read the instructions carefully and check the instrument: check whether there is any damage in the glass kettle and whether the interface is consistent
.
The interface of the reaction kettle of the chemical high and low temperature circulation system should not be tightened too tightly, and the looseness should be checked regularly to prevent the connector from being bitten due to long-term locking
.
