Pre-use inspection and after-use maintenance instructions for gel filling machine

Gel filling machine in the shape and structure can be divided into two parts of the pipe management machine and filling machine two part device, the jacket is sorted into the management turntable, the pipe to be filled is sent into the filling machine by the conveyor belt, and the tube is sent to the main working turntable
by the working mechanism.
The photoelectric detection sensor determines whether the gel tube to be filled is present and is used to decide whether to fill
it.
The filling gun is automatically moved into the tube, and the gel is automatically injected into the
tube.
The cap is sorted out by the automatic capping mechanism, and the automatic capping station is entered in order to complete the output
of the final filling finished product.
First, the gel filling machine pre-use inspection: Before starting, ensure that the power plug of the filling machine is connected to the 220V/380V power supply, and the grounding wire
of the machine chassis.
Make sure the air pressure on the filling machine is 0.
06-0.
08Mpa
.
Check whether each motor, bearing, etc.
need to add lubricating oil, it is strictly forbidden to run without oil, and the machine can be started only after normal, while observing whether all reservoirs have materials, whether the chain plate is stuck, whether there are debris on the conveyor belt, whether there are bottle caps in the storage cap track, whether the water source, power supply, and air source are connected, whether the fasteners in each part are loose, and can only be used
normally after the operation of each part is stable 。 Second, the post-use maintenance of the gel filling machine: 1.
In production, we should often observe the operation of the components, whether there is any abnormality, and whether the screws are loose; 2.
Always check the place where the filling machine wire is connected, the contact requirements meet the safety, the power supply is normal, and the voltage is stable; 3.
Do a good job of cleaning and hygiene, if you stop using it for a long time, remove the materials in the pipeline and keep the surface of the machine clean; 4.
The storage environment of the filling machine has certain requirements, the indoor humidity should be moderate, the ventilation is good, and the dust meets certain requirements; 5.
Add lubricating oil to the component position of the machine before use, replace the lubricating oil every year for the reducer motor, check the tightness of the chain, and adjust the
tension in time.