Powerful and compact, high-temperature synchronous thermal analyzers facilitate laboratory placement

The high temperature synchronous thermal analyzer is the core part of the whole device, which is composed of
a sample chamber, a specimen crucible, a thermocouple, etc.

Among them, thermocouple is the key component, which is both a temperature measurement tool and a transmission signal tool, which can be selected according to
the test requirements.

Since the analyte will cause a change in weight due to the reaction, this weight change due to the temperature change can be obtained by the balance measurement mentioned above, a set of thermocouple thermocouple suppliers are placed close to the analyte but do not touch, in order to measure the temperature near the analyte, thereby measuring the temperature of the object to be measured and control the temperature curve
of the high temperature furnace.

The instrument has built-in reference materials, with automatic diagnosis and fault warning function, and the light source adopts self-collimation module design, no adjustment is required, and the light source is easily replaced
.

Features of high temperature synchronous thermal analyzer: 1.
TG, DTA mode (△T) and DSC mode (mW) data results can be measured synchronously
.

2.
The sensor used can synchronize the test sample temperature and reference temperature
.

3.
The intensive furnace design obtains better temperature control ability, so as to obtain more accurate test results
.

4.
The starting test temperature is 15oC, which can well control the volatilization
of moisture and solvent in the sample.

5.
Built-in automatic gas quality control switching device can better control the test atmosphere
.

6, extremely fast cooling rate, greatly improve the use of the instrument efficiency
.

7.
Optional 45-bit autosampler for unattended test operation
.

8.
The instrument has powerful functions and dexterous volume, which is convenient for laboratory placement
.

9.
Adopt powerful PyrisTM operation software
.

The stirring speed and circulation speed can be continuously adjusted as needed, and the stirring speed and circulation speed of the selected manufacturing can make all kinds of measured particle groups and dispersed media mix evenly, and can reduce the impact caused by bubbles, fully ensuring the stability and reliability
of the test data.

When everything is ready, the sample can be placed in the hot air circulation oven, then connected and turned on the power supply, and the red indicator light indicates that the box is heated
.

High Temperature Synchronous Thermal Analyzer When the temperature reaches the controlled temperature, the red light goes out and the green light turns on and the temperature
is constant.

The hot air circulation oven with blower must be turned on during the heating and constant temperature process, otherwise it will affect the uniformity of the studio temperature and damage the heating element
.

The use of thermal insulation layer, constant temperature drying control system, built-in cycle accumulation method, rapidly improve the concentration of ozone in time, so that ozone gas rapidly diffuse in the cavity
.