Powder True Density Tester – A digital display powder density tester with a short test time @2022 has been updated

DDB Powder True Density Tester – A Short Test Time Digital Display Powder Density Tester @2022 Updated Powder True Density tester - a digital powder density tester with short test time @ 2022 has been updatedVerified Powder True Density Tester Test Categories Vulcanized Rubber, Non-Styrofoam, Carbon True Density, Rock, Coal True Density, Cement powder, ceramic material, natural stone, soil true density Test time about 20 seconds Display value density Hengmei powder true density analyzer features: 1.
Read the powder density of any density > 1 or <1.
2.
With temperature compensation setting function, more humanized operation, more in line with the needs of on-site operation 3.
Standard temperature specific gravity tank 4.
The use of integrated stainless steel weighing table, with strong corrosion resistance 5.
With density upper and lower limit function, can determine whether the specific gravity of the object to be measured is qualified or not
.

With buzzer device 6.
Built-in battery, equipped with a draft shield, more suitable for field testing.
7.
Support RS232, directly connected to the computer or printer 8.
Blue background white light LCD display, display clearer Standard accessories: density meter host (2) thermometer (3) glass dish (4) correction weight (5) pyrometer (6) dropper (7) instruction manual (8) warranty card (9) funnel (10) power cord Optional accessories: (1) printer (2) print line Measurement step 1, after entering the powder true density test mode, the status display area displays "AIR"
.

Place the container on the weighing pan and press the "ZERO" key to zero
.

2.
Put the sample into the container and place it on the weighing pan, after stabilization, press the "ENTER" key
.

When confirming the weight in the sample air, "SAV-A" is displayed to indicate the weight value
in the sample air that has been recorded.

3.
At this time, the status display area displays "Com"
.

Fill the hydrovial with liquid, place the sample on the weighing pan with the sample, and when it is stable, press the "ENTER" key
.

When confirming the total mixed weight of the sample + pycnometer vigon, "SAV-B" is displayed, indicating that the total weight value
has been recorded.

4.
At this time, the status display area displays "LIq"
.

Pour the hydrovial liquid out, and then completely pour the sample into the hydroviometer, and then fill the hydrovial with liquid, place it on the weighing pan together with the container, stabilize it, and then press the "ENTER" key to confirm
.

Displays "SAV-C" to indicate the weight value
of the recorded sample in the liquid.

5.
Automatically display the density value
of the sample to be measured.

6.
Press the "PRINT" key, you can input test results and other data through RS232 communication or print out the test time and statistics of various test data through a dedicated micro printer
.

7.
Press the "SET" key to return to the state to be tested, and the measurement of the next group of samples can be performed
.