-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
-
Cosmetic Ingredient
- Water Treatment Chemical
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
As a testing instrument, the walk-in test chamber is likely to cause inaccurate test results in areas where there are all wrong operations during the application process
.
So what aspects should we pay attention to when applying this machine? Some small key points in the walk-in test chamber experiment, some of which cannot be ignored: because the environmental test chamber is working under normal conditions Because the tailgate is all closed, everyone can't see the working conditions in the laboratory, and everyone can't see the changes in the position, shape, and characteristics of the test object.
Therefore, we must pay special attention when placing the test object.
Placement position, the following are the key points of the detailed placement situation: 1.
The test object needs to be placed in the middle of the environmental test box
.
It can neither block the air duct, nor stick to the box wall (the distance between the box wall should be at least 5 mm)
.
2.
If the tested product is not an independent one, but several, then a certain gap should be left between the tested product (to prevent the test from being asymmetrical)
.
3.
If an external power supply is required for the walk-in test box, the wires should be uniformly received on the edge of the detection hole, and the wires should not be entangled
.
In addition to the above points, some other small key points should not be ignored.
We must pay attention when testing products with the walk-in test box to prevent inaccurate test results or other adverse effects
.
.
So what aspects should we pay attention to when applying this machine? Some small key points in the walk-in test chamber experiment, some of which cannot be ignored: because the environmental test chamber is working under normal conditions Because the tailgate is all closed, everyone can't see the working conditions in the laboratory, and everyone can't see the changes in the position, shape, and characteristics of the test object.
Therefore, we must pay special attention when placing the test object.
Placement position, the following are the key points of the detailed placement situation: 1.
The test object needs to be placed in the middle of the environmental test box
.
It can neither block the air duct, nor stick to the box wall (the distance between the box wall should be at least 5 mm)
.
2.
If the tested product is not an independent one, but several, then a certain gap should be left between the tested product (to prevent the test from being asymmetrical)
.
3.
If an external power supply is required for the walk-in test box, the wires should be uniformly received on the edge of the detection hole, and the wires should not be entangled
.
In addition to the above points, some other small key points should not be ignored.
We must pay attention when testing products with the walk-in test box to prevent inaccurate test results or other adverse effects
.
