-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
-
Cosmetic Ingredient
- Water Treatment Chemical
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
In the process of using the high and low temperature integrated machine of the pharmaceutical reactor, some small faults are unavoidable, such as mechanical seal failure.
If the sealing function of the high and low temperature integrated machine of the pharmaceutical reactor is found to decline during use, Wuxi Guanya recommends Check that the agitator rotates properly
.
1.
Plug in the power plug, turn on the power switch of the inverter, and use the speed control button to select the appropriate speed
.
2.
After the stirring rod is installed, you need to turn it by hand to pay attention to whether the macaroni is good.
If the macaroni is not good, it should be loosened and then clamped.
After the clamping is correct, turn on the power.
The speed is gradually adjusted from slow to fast.
Use stirring The speed of the rod is adjusted from slow to fast.
When using the stirring rod, the stirring blade can be moved up and down 5cm as required
.
3.
If the sealing performance of the kettle is found to be degraded, please check whether the rotating bearing in the agitator sleeve is in good condition
.
4.
The inlet and outlet of the interlayer on the reactor can be heated and reacted by circulating the heat transfer oil, and the refrigerant can be reacted at low temperature
.
5.
During the low temperature test, the bottom discharge valve will be frosted.
When using the valve, it must be partially frozen first, so as to prevent equipment damage
.
6.
During use, if there are granular objects in the solution, there may be accumulations on the valve valve when discharging.
When using it again, the air tightness will be affected.
After each discharging, it needs to be cleaned and used again
.
Wuxi Guanya Pharmaceutical Reactor High and Low Temperature Integrated Machine is widely used in petroleum, chemical and other industries.
It is used to complete the pressure vessel of the material in the process.
The inner container is placed with the reaction material.
Warm up and cool down
.
If the sealing function of the high and low temperature integrated machine of the pharmaceutical reactor is found to decline during use, Wuxi Guanya recommends Check that the agitator rotates properly
.
1.
Plug in the power plug, turn on the power switch of the inverter, and use the speed control button to select the appropriate speed
.
2.
After the stirring rod is installed, you need to turn it by hand to pay attention to whether the macaroni is good.
If the macaroni is not good, it should be loosened and then clamped.
After the clamping is correct, turn on the power.
The speed is gradually adjusted from slow to fast.
Use stirring The speed of the rod is adjusted from slow to fast.
When using the stirring rod, the stirring blade can be moved up and down 5cm as required
.
3.
If the sealing performance of the kettle is found to be degraded, please check whether the rotating bearing in the agitator sleeve is in good condition
.
4.
The inlet and outlet of the interlayer on the reactor can be heated and reacted by circulating the heat transfer oil, and the refrigerant can be reacted at low temperature
.
5.
During the low temperature test, the bottom discharge valve will be frosted.
When using the valve, it must be partially frozen first, so as to prevent equipment damage
.
6.
During use, if there are granular objects in the solution, there may be accumulations on the valve valve when discharging.
When using it again, the air tightness will be affected.
After each discharging, it needs to be cleaned and used again
.
Wuxi Guanya Pharmaceutical Reactor High and Low Temperature Integrated Machine is widely used in petroleum, chemical and other industries.
It is used to complete the pressure vessel of the material in the process.
The inner container is placed with the reaction material.
Warm up and cool down
.
