Plastic cap torque meter - recommended

Plastic Cap Torque Meter - It is recommended that you encounter many problems when using bottled drinks such as.
At present, the domestic standard for plastic bottle caps is "GB/T17876-2010 packaging container plastic anti-theft bottle caps", which has clear provisions
on the sealing performance and torque force of gas caps and non-gas caps.

As given in the standard about the physical and mechanical properties
related to cap sealing and torque.

It clearly stipulates the opening torque performance: the torque force of the cap with a specification of less than 38mm should be 0.
6N.
m-2.
2N.
m, the torque force of the cap with a specification of less than 38mm and the height of not more than 12mm should be 0.
4N.
m-2.
2N.
m, and the torque force of the cap of 38mm should be 0.
6N.
m-2.
9N.
m
.

Can be applied to the NLY-20 bottle cap torque meter of Sanquan Zhongshi for testing, before the experiment, the specified torque force value will be entered into the instrument for setting, clamping flat, twisting the cap, when the instrument alarm prompts to reach the specified torque force value
.

In the industry, the torque force is generally used to choose 1.
2N.
m
.

The NLY-20 bottle cap torque meter produced by Jinan Sanquan Zhongshi Experimental Instrument has the advantages of simple operation and accurate detection value while meeting national standards, and has become a necessary instrument
for bottle cap torque detection.

Technical parameters Range 5Nm (10Nm range optional) Measurement error Level 1 Resolution 0.
001Nm clamping range Φ5mm~Φ170mm Data storage 1-80pcs Dimensions 400mm×280mm×190mm (Length, width and height) Weight 8kg Operating temperature 15°C-50°C Relative humidity 80%, non-condensing Working power supply 220V 50Hz Plastic cap torque meter - recommended