-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
-
Cosmetic Ingredient
- Water Treatment Chemical
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
Plastic bottle cap detection equipment-technical literature There are many problems when using bottled beverages, such as the bottle cap is difficult to ope.
At present, the domestic standard for plastic bottle caps is "GB/T17876-2010 Packaging Container Plastic Anti-theft Bottle Caps" , which clearly stipulates the technical indicators and test methods of the sealing performance and torque force of the gas cap and the non-gas ca.
Relevant physico-mechanical properties for closure and torque as given in the standar.
It clearly stipulates the opening torque performance: the torque force of caps with a size less than 38mm should be 6Nm-2Nm, the torque force of bottle caps with a size less than 38mm and a height of not more than 12mm should be 4Nm-2Nm, and the torque of bottle caps with a size of 38mm should be 4Nm-2N.
The force should be 6Nm-9N.
It can be tested with the NLY-20 bottle cap torque meter of Sanquan Zhongsh.
Before the experiment, input the specified torque value into the instrument for setting, clamp the flat body, twist the bottle cap, and the specified torque value will be reached when the instrument alarm.
.The commonly used torque force in the industry is 2N.
The NLY-20 bottle cap torque meter produced by Jinan Sanquan Zhongshi Experimental Instrument not only meets the national standard, but also has the advantages of simple operation and accurate detection value, and has become a necessary instrument for bottle cap torque detectio.
Technical parameters Range range 5Nm (10Nm range optional) Measurement error 1-level resolution 001Nm Clamping range Φ5mm～Φ170mm Data storage 1-80 Dimensions 400mm×280mm×190mm (length, width and height) Weight 8kg Operating temperature 15℃- 50℃ Relative Humidity 80%, Non-condensing Working Power Supply 220V 50Hz Plastic Bottle Cap Inspection Instrument-Technical Literature
At present, the domestic standard for plastic bottle caps is "GB/T17876-2010 Packaging Container Plastic Anti-theft Bottle Caps" , which clearly stipulates the technical indicators and test methods of the sealing performance and torque force of the gas cap and the non-gas ca.
Relevant physico-mechanical properties for closure and torque as given in the standar.
It clearly stipulates the opening torque performance: the torque force of caps with a size less than 38mm should be 6Nm-2Nm, the torque force of bottle caps with a size less than 38mm and a height of not more than 12mm should be 4Nm-2Nm, and the torque of bottle caps with a size of 38mm should be 4Nm-2N.
The force should be 6Nm-9N.
It can be tested with the NLY-20 bottle cap torque meter of Sanquan Zhongsh.
Before the experiment, input the specified torque value into the instrument for setting, clamp the flat body, twist the bottle cap, and the specified torque value will be reached when the instrument alarm.
.The commonly used torque force in the industry is 2N.
The NLY-20 bottle cap torque meter produced by Jinan Sanquan Zhongshi Experimental Instrument not only meets the national standard, but also has the advantages of simple operation and accurate detection value, and has become a necessary instrument for bottle cap torque detectio.
Technical parameters Range range 5Nm (10Nm range optional) Measurement error 1-level resolution 001Nm Clamping range Φ5mm～Φ170mm Data storage 1-80 Dimensions 400mm×280mm×190mm (length, width and height) Weight 8kg Operating temperature 15℃- 50℃ Relative Humidity 80%, Non-condensing Working Power Supply 220V 50Hz Plastic Bottle Cap Inspection Instrument-Technical Literature
