Operation method and precautions of digital display constant temperature water bath

Operation method: 1 The power supply of the product must meet the requirements of AC 220V50Hz and be connected with safety grounding wire 2 First, inject clean water into the bath pot to the specified scale line, then connect the power supply, turn on the power switch, and the indicator light indicates that the circuit is normally connected 3 Turn the temperature adjusting knob to adjust the specified temperature required by the bath temperature Turn clockwise to increase the bath temperature, or reduce the bath temperature, whichever is the reading on the table 4 When the temperature knob is adjusted, the red and green indicator lights up alternately When the temperature reaches the specified temperature, the red indicator lights up, indicating that the heating power has been cut off and the water bath stops heating When the bath temperature is lower than the specified temperature, the green indicator lights up and the heating power automatically turns on to continue the water bath heating Precautions for digital display constant temperature water bath 1 Do not fill the water too full when filling, so as to prevent water from flowing into the compartment and control box when boiling, so as to prevent electric shock When not in use, Zui should drain the water in time, wipe it clean and keep it clean, so as to facilitate the service life 2 The temperature control system is achieved through careful adjustment It is equipped with special equipment The user does not adjust the internal components of the machine at will, otherwise the accuracy will be affected Model and specification power supply voltage input power temperature control range fluctuation degree hhs-s single hole 220V50Hz 300wrt + 5 ℃～ 99 ℃± 0.1 ℃ hhs-2s double hole 220V50Hz 500wrt + 5 ℃～ 99 ℃ hhs-4s double row four hole 220V50Hz 1000wrt + 5 ℃～ 99 ℃ hhs-4s single row four hole 220V50Hz 1000wrt + 5 ℃～ 99 ℃ Hhs-6s double row six hole 220V50Hz 1500wrt + 5 ℃～ 99 ℃ hhs-6s single row six hole 220V50Hz 1500wrt + 5 ℃～ 99 ℃ hhs-8s double row eight hole 220V50Hz 2000wrt + 5 ℃～ 99 ℃ hhs-8s single row eight hole 220V50Hz 2000wrt + 5 ℃～ 99 ℃ Shangyu Star Instrument Equipment Co., Ltd is located in Daoxu Town, Shangyu District, Shaoxing City, Zhejiang Province It is an enterprise integrating production, product development, processing and trade The company's main products: drying box series, incubator series, laboratory muffle furnace series, distiller series, as well as clean workbench, air shower room, ventilation cabinet, biosafety cabinet and other complete sets of purification equipment The company has a strong technical research and development team, a strong after-sales service system, is the leading manufacturer of complete set of laboratory equipment in China, welcome customers to buy.