Ningde: The robot spray insulation paint test was successfully completed

China Coatings Network
:
" using robots to insulate wires, not only can shorten the distribution network transformation time, but also reduce the strength of the human work industry, effectively solve some areas of the distribution network transformation and operation of the problem. "A few days ago, Ningde power supply company production and maintenance building site, an automatic spraying robot in the staff's wireless remote control, slowly through the bare wire, then, the insulation paint was evenly and flatly sprayed on the wire surface, a few minutes later, the entire bare wire successfully completed the insulation transformation, insulation test qualified.
understood that over the years, substation export 10 kV line 2km insulation transformation, as well as housing trees adjacent to the partial insulation of bare wires has been the distribution network transformation and operation of the problem. Previously, the company had to rely on manual replacement of insulated conductors in the face of such problems. However, due to geographical location, the original rod tower force situation, green compensation, power outage time and other factors, a considerable part of the region is difficult to implement.
The robot spray insulation paint test is mainly carried out by the company's distribution and inspection department for the current distribution network transformation and operation of the existing problems, and the technical test is also the first attempt of the national network system, provincial company system. The technology is sprayed using a wireless remote control robot, which is installed in the robot by installing insulation
coatings
with high insulation performance, inclusiveness, water resistance and weather resistance, and suspends the robot above the wire, wirelessly manipulating its movement to upgrade the bare wire to an insulated wire.
automatic spraying insulation paint robot changed the traditional solution to the "insulation transformation" method, to achieve the operators in the ground can also carry out bare wire insulation transformation, greatly solve the labor intensity of manual work, long power outage time, difficult to transform and other issues, so as to achieve safe and efficient effect, as well as timely elimination of the existence of safety hazards, greatly improve the safety level of distribution network operation. In the next phase, the company will also pilot on the shipping wires.