Nine tricks to get the acceptance project of real stone paint for exterior walls!

Exterior wall coatings are becoming more and more popular.

So what is the acceptance specification for the construction of real stone paint for exterior walls?

One check if the color is correct

Checking the color of real stone paint is mainly to prevent large-scale chromatic aberration in construction.

Second, check whether there is dripping, and whether the painting is even

Real stone paint is prone to drip and sag during the spraying process.

Three check the brush marks, texture and flatness

In addition to spraying with a spray gun, the real stone paint will also be applied by batch scraping.

Four check the surface finish

Real stone paint imitates natural stone, and the finish is very important.

Five check whether the dividing line, etc.

The dividing line has been mentioned above, and this step must also be paid attention to.

Six check whether there is efflorescence, bite color

Efflorescence and biting color are mainly caused by the construction method, which requires rich experience in the painting engineer, otherwise the wall is covered with fine boundary lines, and everyone will feel disappointed.

Seven check whether the brush is missed, through the bottom

Missing paint often occurs in common exterior wall decoration, but it can be remedied, but it is better to do it all at once when spraying.

8.

Powder falling and peeling are generally not found in a short time, and once they happen, they are often repaired on a large scale.

Nine check whether the finished surface is contaminated

Facing pollution is hard to prevent, and it is mandatory to protect the construction site at the completion of the construction to prevent the pollution of the facing materials such as dust and oil.