Multi-station protective clothing synthetic blood penetration tester Shanghai Huitao

Multi-station protective clothing synthetic blood penetration tester Product introduction: Multi-station protective clothing synthetic blood penetration tester is used to determine the penetration performance of synthetic blood and other liquid-derived liquid injection to evaluate its safety protection performance
.

It is mainly used to test the permeability of protective clothing to blood, body fluids, blood pathogens (tested with Phi-X 174 antibiotics), synthetic blood and other liquids
.

Suitable for gloves, protective clothing, outer covers, one-piece overalls, boots and other protective equipment anti-liquid permeability
.

ISO 22509:2004; F1862/F1862M-2013ASTM F1671 Phi-X174 Phage penetration as a test method for determining the penetration of protective clothing materials against blood-borne pathogens; ASTM F1670 Protective clothing material resistance to artificial blood penetration test method; ASTM F903 Test method for liquid permeability resistance of protective taking materials; ISO 16603:2004 Protective clothing to prevent contact with blood and body fluids Determination of the anti-permeability synthesis of protective clothing against blood and body fluids Blood test method; ISO 16604:2004 Protective clothing to prevent contact with blood and body fluids Determination of the impermeability of protective clothing materials against blood pathogens using the Phi-X 174 antimicrobial test method; YY/T 0699-2008 Liquid chemical protective equipment protective clothing material anti-compression liquid penetration performance test method; YY/T 0689-2008 Blood and body fluid protection equipment Protective clothing materials anti-bloodborne pathogen penetration performance test Phi-X174 phage test method; YY/T 0700-2008 Blood and body fluid protection equipment Protective clothing material anti-blood and body fluid penetration performance test Synthetic blood test method; GB/T 19082-2009 Technical requirements for medical disposable protective clothing and other standards
.

Main uses: Suitable for protective clothing resistance to the penetration of synthetic blood at different levels of test pressure
.

Under continuous pressure, synthetic blood is tested on protective clothing materials, and the penetration of synthetic blood on the material is visually checked
.

Product features: 1, the instrument can provide (20 ±1 1) kPa air source continuous pressure on the specimen, not limited by the space of the test site
.

2.
The instrument has a pressure gauge to display the pressure pressure, and the pressure pressure is adjustable
.

3, the use of pressurized medium: compressed air
.

4.
Stainless steel penetrates the test groove to ensure that the specimen is firmly clamped and prevents synthetic blood from splashing
around.

5.
Square metal blocking network: open space ≥50%; Bends ≤5mm
at 20kPa.

6.
Digital display timer, the accuracy ± 1 1 seconds
.

7.
The instrument has a clamp
that can generate 13.
5Nm torque.

8.
The instrument structure is the same as
that of "Test Instrument Schematic" and "Test Tank Structure" in GB19082-2009 standard.

Technical parameters: 1, pressure technical indicators Pressure point: 1.
75 kpa; 3.
5kpa ； 7kpa ； 14kpa ； 20kpa2、 specimen size: 75mm × 75mm, 3、 Pressure area: 28.
27 cm24, Power supply: AC220V , 50Hz , 100W