Mechanical engineering experts share knowledge of electrostatic spraying of powder coatings

since the appearance of the powder coating electrostatic sprayer on the market, now, it has been lightning not to cover the ear of the trend around the world to popularize and popularize, but need to pay more attention to the use of spraying machine equipment, may be because of the spray equipment in the process of discontinuous work and powder quality, so the later may cause some powder can not be fully utilizedin fact, if in practice, it may be because of its equipment manufacturing, technology and many other factors, in addition to the recycling device now there is always such or that deficiencySo, many friends are now looking for an ideal powder recovery system to better solve the problem of powder recovery during spraying equipment, but its suction section consists of a free-flowing wind plate, a regulatory system and a ventAnd its main function is to draw powder dust or unused powder floating in the air from the spray equipment chamber into the separation system to separate itbasically, in fact, the separation section of the sprayer consists of a cyclone separation barrel and its filter sieve and air inandAccording to Transenson spraying experts said that its main role is through a specific cyclone separation barrel device, but also can be fully utilized powder into the original powder box mixed with the original powder, of course, we can also re-enter the spray equipment cycle, and many times, the other part of the small particles of powder is difficult to absorb electrons in the spray equipment electric field and chargedin the use of the process, if there is a filter is not good, the later stage is likely to lead to poor filtration, but also will let the discharge of micropowder into the atmosphere, which will also affect the surrounding environmentSource: Hutchison Surface Treatment Network