-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
-
Cosmetic Ingredient
- Water Treatment Chemical
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
High-efficiency wet granulator is a new type of wet granulation equipment, which integrates mixing and granulation, and then produces high-quality wet granules.
, food, chemical, dye and other industries
.
The following editor will briefly introduce the maintenance method of the high-efficiency wet granulator, as follows: 1.
The machine should be placed in a dry and clean room, and the atmosphere should not contain acids and other corrosive gases that flow to the machine parts.
place to use
.
2.
The machine should not run for more than 20 hours a day, otherwise it will cause the risk of ethanol dust explosion for a long time
.
3.
After the machine is used for one time or when it is shut down, the rotating drum should be taken out to clean and brush the remaining powder in the bucket, and then install it properly to prepare for the next use
.
4.
Regularly check the machine parts, once a month, check whether the worm gear, worm, bearing and other moving parts are flexible and worn, and if any defect is found, it should be repaired in time, and it should not be used for free
.
5.
If the machine is not used for a long time, the whole body of the machine must be wiped clean, and the smooth surface of the machine parts should be coated with anti-rust oil and covered with a cloth
.
, food, chemical, dye and other industries
.
The following editor will briefly introduce the maintenance method of the high-efficiency wet granulator, as follows: 1.
The machine should be placed in a dry and clean room, and the atmosphere should not contain acids and other corrosive gases that flow to the machine parts.
place to use
.
2.
The machine should not run for more than 20 hours a day, otherwise it will cause the risk of ethanol dust explosion for a long time
.
3.
After the machine is used for one time or when it is shut down, the rotating drum should be taken out to clean and brush the remaining powder in the bucket, and then install it properly to prepare for the next use
.
4.
Regularly check the machine parts, once a month, check whether the worm gear, worm, bearing and other moving parts are flexible and worn, and if any defect is found, it should be repaired in time, and it should not be used for free
.
5.
If the machine is not used for a long time, the whole body of the machine must be wiped clean, and the smooth surface of the machine parts should be coated with anti-rust oil and covered with a cloth
.
