-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
-
Cosmetic Ingredient
- Water Treatment Chemical
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
Product introduction of Luer comprehensive performance tester: It adopts 7-inch colorful LCD touch screen and Chinese menu display
.
The nominal capacity of the syringe is selected by the keyboard, and the axial force, torque, holding time, internal water pressure, separation force and leakage rate applied by the assembly are displayed during the test process, and the test results can be printed out by the on-board printer
.
Can also test syringes, injection needles, and infusion sets, blood transfusion sets, infusion needles, catheters, anesthesia filters and other medical devices (Luer) conical joints (locking and non-locking) leakage, air leakage, separation force, unscrewing Torque, easy assembly, wire slip resistance, stress cracking, positive and negative pressure and many other performance indicators
.
Execution standard: Comply with ISO80369-1 and GB/T 1962.
1 "Syringes, injection needles and other medical devices 6% (Luer) conical joint * Part: general requirements", GB/T 1962.
2 "Syringes, injection needles and other medical Design and manufacture of relevant provisions in the standard for 6% (Luer) conical joints for instruments Part 2: Locking joints
.
ISO80369 Luer Cone Tester Technical Parameters Axial force: 20N~40N, the error is not greater than ±0.
2N; Internal water pressure: 200kPa~400kPa, the error is not greater than ±5kPa; Separation force: 20N~40N, the error is not greater than ±0.
2 N; Hold time: 1~60s, the error is not more than ±1s can be set arbitrarily; Torque sensor: 0N.
M-1N.
M Nominal capacity: 1mL~60mL optional
.
Net weight: 20Kg Dimensions: 520*360*550 Length, width and height Parts list: 1.
One host 2.
One roll of printing paper 3.
One set of fixtures 4.
One set of weights 5.
One year warranty 6.
Operating instructions 7.
Instrument upgrade service in accordance with national standards
.
The nominal capacity of the syringe is selected by the keyboard, and the axial force, torque, holding time, internal water pressure, separation force and leakage rate applied by the assembly are displayed during the test process, and the test results can be printed out by the on-board printer
.
Can also test syringes, injection needles, and infusion sets, blood transfusion sets, infusion needles, catheters, anesthesia filters and other medical devices (Luer) conical joints (locking and non-locking) leakage, air leakage, separation force, unscrewing Torque, easy assembly, wire slip resistance, stress cracking, positive and negative pressure and many other performance indicators
.
Execution standard: Comply with ISO80369-1 and GB/T 1962.
1 "Syringes, injection needles and other medical devices 6% (Luer) conical joint * Part: general requirements", GB/T 1962.
2 "Syringes, injection needles and other medical Design and manufacture of relevant provisions in the standard for 6% (Luer) conical joints for instruments Part 2: Locking joints
.
ISO80369 Luer Cone Tester Technical Parameters Axial force: 20N~40N, the error is not greater than ±0.
2N; Internal water pressure: 200kPa~400kPa, the error is not greater than ±5kPa; Separation force: 20N~40N, the error is not greater than ±0.
2 N; Hold time: 1~60s, the error is not more than ±1s can be set arbitrarily; Torque sensor: 0N.
M-1N.
M Nominal capacity: 1mL~60mL optional
.
Net weight: 20Kg Dimensions: 520*360*550 Length, width and height Parts list: 1.
One host 2.
One roll of printing paper 3.
One set of fixtures 4.
One set of weights 5.
One year warranty 6.
Operating instructions 7.
Instrument upgrade service in accordance with national standards
