LT-018H Diaper Absorption Speed Tester Sanitary Napkin Pad Instrumentation

LT-018H Diaper Absorption Speed Tester Sanitary Napkin Pad Instrumentation Detection Principle: Sanitary Napkin Sticks to the Curved Specimen Holder of the Absorption Speed Test Competition, The Standard Test Module is placed in the Sample Surface Absorption Area, the automatic dosing device adds a certain volume of standard synthetic test solution to the standard test module, and the timer records the time when the sanitary napkin completely absorbs the standard synthetic test solution, indicating its absorption rate
.

The specific parameters are as follows: (1) standard test module: size (76 ±1) mmX (80±1) mm, mass (127.
0±) 2.
5g; (2) arc specimen base: length (230±1) mm, width of (80±) mm; (3) automatic dosing device: dosing amount of (5.
0±0.
1) mL, discharge velocity less than or equal to 3s; (4) automatic timer: Resolution 0.
01s.
(5) Test Material: Standard Synthetic Test Solution, Distilled Water or Deionized Water Operating EnvironmentThe instrument is used in residential, commercial and light industrial environments in accordance with standard menstrual pants 39391 and BS EN 50081-1 and BS EN50082-1 Climatic environments Its products have the right to make changes and improvements, but is not obligated to perform improvements and installations
on the products already produced.

The instrument operates under the following conditions: altitude <2000m, operating temperature: 13 ~ 30 ° C (56 ~ 86 ° F), relative humidity of 25 ~ 75%, storage temperature: 10 ~ 43 ° C (50 ~ 110 ° F), relative humidity of 20 ~ 80%.


The instrument can be placed in the operating environment required by the standard for the operational consistency of
the specimen moisture adjustment with the actual wear test.

Electrical information: The electrical requirements of this instrument comply with EN 61010-1:2001 for measurement, control and laboratory use
.

Installation type and pollution level: Installation category I.
, pollution level 1