Learn about the standardized operation of reactor refrigeration and heating temperature control equipment

Reactor refrigeration and heating temperature control equipment can be used with most experimental instruments, such as rotary evaporators, and liquid environments
with uniform and constant temperatures.

Now it is widely used in petroleum, chemical industry, medicine, scientific research and other fields
.

So how to standardize the operation of the reactor refrigeration and heating temperature control equipment, many times everyone wants to be able to understand
.

1, the operation of the reactor refrigeration and heating temperature control equipment must be standardized in order to operate effectively, manufacturers they have a good mode of operation management, the same in the design of all the systems can be effectively operated and adjusted, can bring better results
.

2.
Reactor refrigeration and heating temperature control equipment refers to the circulation device that provides heat and cold source for the reactor, and laboratory instruments and equipment
with dual functions of heating and refrigeration.

The thermal conductive medium circulates in a closed circulating system to heat or cool
the desired object.

3, the use of reactor refrigeration and heating temperature control equipment to clean regularly, each time in the process of operation to do a good job of follow-up treatment, after each operation should be removed residue, not only the surface, for the pipeline inside should also be cleaned frequently, and when not used to clean after the internal pH, especially after the dosing cleaning, dosing does not allow some rough surface materials to clean
.

4, the reactor refrigeration heating temperature control equipment system adjustment is also very simple and convenient, different circulation settings, combined with a variety of different pumps to run, in the energy efficiency area, so that the entire system of transportation energy consumption is reduced, continuous adjustment, the cost is relatively low, in the actual work process of selection or configuration, if not appropriate, may affect the service life
of the reactor refrigeration and heating temperature control equipment.