Learn about the maintenance precautions of the reagent filling machine

Automatic reagent filling machine The filling machine is composed of automatic bottle unscrambler, filling and capping machine, and horizontal self-adhesive labeling machine, which can complete processes such as bottle unscrambler, filling, capping (rolling), and labeling.
, This production line has reasonable design, stable and reliable operation, easy maintenance, simple operation, and fully meets the requirements of GMP
.

The maintenance precautions of the automatic reagent filling machine are as follows: 1.
Regularly repair and maintain the reagent filling machine according to the instructions, and rub oil on the body of the reagent filling machine, so that the body of the reagent filling machine has an oil layer as much as possible.
It can isolate the air, avoid the rust of the spray filling machine, and protect the body of the filling machine well, which is also a way to prolong the service life of the reagent filling machine
.

2.
The reagent filling machine must first rotate the machine with the crank handle to check whether there is any abnormality in its rotation, and it can be confirmed that it is normal before driving
.

When adjusting the machine, use proper tools
.

3.
Before operating the reagent filling machine, you need to read the product manual carefully, and be familiar with the adjustment and use of the reagent filling machine.
When operating, you must strictly follow the instructions in the reagent filling machine's manual, and pay attention to details.
problem
.

 　　Fourth, when a fault is found, we must turn off the power in time, press the emergency stop button when necessary, lift the cover after deflation, and then turn off the voltage, check the cause, and eliminate the fault
.

 　　5.
After the reagent filling machine is unpacked, first check whether the random technical data is complete and whether the machine is damaged during transportation, so as to solve it in time
.

Install and adjust the feed assembly and discharge assembly according to the outline diagrams in this manual
.

Fill each lubrication point with new oil
.

Use the crank handle to turn the machine to check whether the machine is running in the correct direction, and the machine must be protected and grounded
.

 　　6.
We need to check the machine frequently to see if the contact of various parts of the machine is good.
We must ensure the safe use of electricity to prevent damage caused by incorrect electricity use
.

Also pay attention to the cleaning of the sealing varnish of the hot-pressing frame, do not leave foreign objects on it, and ensure that the aerosol filling machine is as clean as possible, so as to avoid the material being left to the inlet for a long time to cause corrosion
.

 　　7.
Whenever the machine is adjusted, the loosened screws must be tightened, and the machine can be driven only after turning the machine with the crank handle to check whether its action meets the requirements
.

During the production process of the machine, it is necessary to remove the liquid medicine or glass debris in time
.