KL2809 bus terminal, 16-channel digital output

The KL2809 digital output terminal module connects binary control signals from automation equipment to process stage actuators
with galvanic isolation.
The KL2809 is polarity reversal protected and handles load current, and the output is overload and short circuit protected
.
The bus terminal module consists of 16 channels and its signal status is indicated
by LEDs.
The terminal is particularly suitable for space-saving use
in the control cabinet.
This connection technology is particularly suitable for single-ended inputs
.
All components must use the same reference point
as the KL2809.
Power contacts loop-through
.
The output is fed through the 24 V power supply contacts in the KL2809
.
In the case of solid wires, the conductor can be connected using the direct insertion technique without the need for tools
.
HD bus terminals with higher packing density (high density) have 16 connection points
in the housing of the 12 mm terminal block.
Product Information Technology Data Accessories Software Documents and Download Beckon Information System Application NotesRelated Product Technical Data Housing Data Reaching Apex Technical Data KL2809 Connection Technology 1 Line Output Number 16 Nominal Voltage 24 V DC (-15 %/+20 %) Load Type Ohms, Inductance, Lamp Load Maximum
.
Output current 0.
5 A per channel (short-circuit proof) short-circuit current< 2 amp breaking energy < 150 mJ/channel reverse voltage protection is typical for galvanically isolated 500 V (K-bus/field potential) current consumption power contacts
.
35 mA + load current consumption K-bus type
.
Bit width in 35 mA process image 16 outputs configuration without address or configuration setting weight approx.
70 g Operating / Storage Temperature -25.
.
.
+60 °C/-40.
.
.
+85 °C Relative humidity 95 %, non-condensing vibration / shock resistance according to EN 60068-2-6/EN 60068-2-2-27EMC immunity/radiation according to EN 61000-6-2/EN 61000-6-4 protection
。 Rating / Installation position IP20 / Variable (see documentation) Approval / marking CE, UL, ATEX, DNV G Explosion Proof Mark II 3 G Ex nA IIC T4 Gc Technical Data Housing Data Arriving at the Apex HD Housing Data HD Enclosure Design Form HD (High Density) Housing Material with Signal LED Polycarbonate Size (W x H x D) 12 mm x 100 mm x 68 mm mounted on a 35 mm DIN rail in accordance with EN 60715 Marking with lock by side-by-side mounting of double slots and key connection – wiring solid conductor (e): direct insertion technology; Thin stranded wire (f) and ferrule (a): drive the spring connection section with a screwdriver s*: 0.
08.
.
.
1.
5 mm²,st*: 0.
25.
.
.
1.
5 mm²,f*: 0.
14.
.
.
0.
75 mm² stripping length 8.
.
.
9 mm