Is the feeding sequence particular when mixing the V-type mixer?

V-type mixer is suitable for mixing powder uniformly, and compared with ordinary mixers, the machine has a more reasonable design, higher mixing efficiency and simpler
operation.
The mixing drum is generally made of stainless steel, and the internal and external proportions are
polished.
The structural design ensures that there is no dead angle of accumulated material, and the cleaning is convenient and thorough
.
There are two inlets in the upper part of the barrel body and one outlet in the lower part
.
The can body can be freely rotated by hand for easy discharging
.
If the user needs other materials, they can ask them
at the time of ordering.
In addition, a forced mixing device can be provided to facilitate the mixing
of some specific materials.
In addition, a humidifier can be attached to change the moisture content
of the powder after spray granulation.
V-mixers can mix two or more materials and are widely
used.
It can mix powder and powder, powder and liquid
.
It can also be used for materials with large specific weights and powder particles, and has good mixing uniformity
.
It can make the material with a ratio of 1:10000 mixed evenly, especially for materials
with different specific gravity.
So here's
the problem.
How should different materials with different specific gravity characteristics be fed and mixed sequentially? Due to the different properties of the material, there are also differences
in the dosing.
The preparation of additive premix should be gradually expanded, from micromix to small mix to medium mix and then to large mix
.
The correct feeding sequence should be: the components with a large proportion should be added first or most of them into the machine, and then a small amount and a small amount of components should be added; In each material, the components with large particle size are generally added to the V-type mixer first, and then the components with small particle size are added; When the specific gravity of the material is different, the material with a small proportion is generally added first, and then the material with a large proportion is added
.
When the amount of material added is 60%~80%, the mixing effect is better
.
When choosing a V-type mixer, it is also necessary to see whether its internal structure is a mirror section
.
All are welded form, screwless structure, external double wire drawing
.
This ensures that the material is unloaded cleanly and prevents the screws from falling into the
material.
Food materials should also use 304 stainless steel or 316 stainless steel, which can be used as a functional coating or protective layer to prevent corrosion and anti-bonding
.
The equipment can also be equipped with a liquid spraying device
.
When a small amount of liquid is added, it is more conducive to the uniform dispersion and mixing
of the liquid in the main material.