Introduction to the use points and maintenance instructions of the colorimeter

Introduction to the use of colorimeters and maintenance instructions Colorimeters are widely used in the color management field of plastics, printing, paint inks, textiles, printing and dyeing clothing and other industries.
Measure the color difference ΔE and ΔLab value of the sample
.

Suitable for enterprise and internal tonal assessment and data management
.

When the colorimeter is used, it must operate according to the regular pace, and it must also be properly maintained and maintained on a regular basis, which can shorten the service life of the colorimeter
.

Individual maintenance of the colorimeter: 1.
The environment where the colorimeter is used is the dust-free workshop and the constant temperature and humidity laboratory.
When the colorimeter is purchased, there will be a protective cover and a protective box.
After use, stop protecting it in time.
Under normal conditions, the colorimeter will be protected.
It is necessary to stop the proofreading after shutting down and turning it on again.
Some engineers suggest that it is not necessary to do the zero (black tube) proofreading within 24 hours.
Regarding the accuracy of the data, the group still recommends that the color proofreading be restarted
.

2.
There are certain procedures for the opening and closing of the colorimeter.
It must be operated according to the rules.
There are multiple operation interfaces.
The operator can choose the bottom of the quartz measuring cup according to his theoretical needs, which has a great influence on the accuracy of the measurement.
, you should give up cleaning the boring measurement gap or when the instrument is not necessary, use the matching magnetic dust shield to cover the measurement hole to prevent dust from entering the measurement mirror and affect the measurement
.

After each measurement, turn the measuring cup 90 degrees in the same direction, and then measure the second and third times
.

3.
The colorimeter is routinely cleaned, and the inside of the instrument can be wiped with a damp cloth and a mild detergent
.

(Note: Do not use any solvent to clean the instrument, otherwise it will damage the appearance of the instrument) Cleaning the optical accessories Carefully lift the instrument and use compressed air to clean the measuring aperture
.

This can help with cleaning optical accessories
.

Clean whiteboard calibration Carefully use a dry, lint-free cloth to clean specifications and white tiles
.

Do not use any solvents or cleaning fluids
.

Confirm that the white standard is stored in a dry, dust-free, intermediate colorimeter that is not directly exposed to light.
Precautions: 1.
The colorimeter presentation form must not be disassembled and viewed, because the optical element (integrating sphere) is accidentally touched.
The cost of training is very high, and the price of the colorimeter is relatively high when you contact the supplier or the engineer of Guangdong Colorful Instruments
.

2.
The colorimeter presentation form must not be disassembled and viewed by yourself.
Because the optical element (integrating sphere) has been accidentally touched, the cost of repairing is very high.
Please contact the supplier or the price of the colorimeter from Guangdong Qicai Instrument Engineer.
It is said that it is relatively high, it is used by special personnel, and it can take good care of the equipment
.

 The above is the relevant introduction about the maintenance points and precautions of the colorimeter.
I believe that everyone has a corresponding understanding of this after reading, and I hope it will be helpful to everyone
.