-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
-
Cosmetic Ingredient
- Water Treatment Chemical
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
If the reactor temperature control device is used, the instructions and related materials must be carefully read before use, and the structural principle, performance indicators, operating procedures, maintenance and related precautions must be carefully mastere.
Before using the reactor temperature control device equipment, please carefully check whether the connection between the equipment and the external wiring (parts) is correct and normal, check whether the power plug is inserted correctly, whether the voltage, frequency and indicator meet the equipment requirements, and check the equipment is in a normal stat.
The liquid medium must be added to the temperature control device of the reactor before use, otherwise the heater will be damaged when the heater is energized, and the liquid level of the medium should be lower than the level of the workbenc.
After turning off the refrigeration switch of the reactor temperature control device, the refrigeration switch should be turned on again every 10 to 20 minutes (depending on the ambient temperature.
If the water, electricity or gas supply fails or is interrupted during the experiment, the relevant switches affecting the reactor's thermostatic equipment should be turned off immediately and protective measures should be take.
The temperature control device of the reactor should be placed in a dry and ventilated place, and there should be no obstacles within 300mm around the instrumen.
When the working temperature of the reactor temperature control device is low, care should be taken not to enter the water tank to prevent frostbit.
After use, all switches are turned off and power is cut off, and the reactor's thermostatic equipment should be cleaned regularly to keep work surfaces and operating panels tid.
The maintenance and maintenance of the temperature control device of the reactor is the basic requirement of a good thermostat tes.
The maintenance and maintenance of the reactor thermostat equipment is related to the integrity rate, utilization rate and experimental teaching rate of the reactor thermosta.
Experiment success rat.
Before using the reactor temperature control device equipment, please carefully check whether the connection between the equipment and the external wiring (parts) is correct and normal, check whether the power plug is inserted correctly, whether the voltage, frequency and indicator meet the equipment requirements, and check the equipment is in a normal stat.
The liquid medium must be added to the temperature control device of the reactor before use, otherwise the heater will be damaged when the heater is energized, and the liquid level of the medium should be lower than the level of the workbenc.
After turning off the refrigeration switch of the reactor temperature control device, the refrigeration switch should be turned on again every 10 to 20 minutes (depending on the ambient temperature.
If the water, electricity or gas supply fails or is interrupted during the experiment, the relevant switches affecting the reactor's thermostatic equipment should be turned off immediately and protective measures should be take.
The temperature control device of the reactor should be placed in a dry and ventilated place, and there should be no obstacles within 300mm around the instrumen.
When the working temperature of the reactor temperature control device is low, care should be taken not to enter the water tank to prevent frostbit.
After use, all switches are turned off and power is cut off, and the reactor's thermostatic equipment should be cleaned regularly to keep work surfaces and operating panels tid.
The maintenance and maintenance of the temperature control device of the reactor is the basic requirement of a good thermostat tes.
The maintenance and maintenance of the reactor thermostat equipment is related to the integrity rate, utilization rate and experimental teaching rate of the reactor thermosta.
Experiment success rat.
