-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
-
Cosmetic Ingredient
- Water Treatment Chemical
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
1.
Instructions for use, maintenance and installation of oral liquid filling machine are as follows: 1.
Because this filling machine is an automatic machine, the dimensions of easy-to-pull bottle, bottle pad and bottle cap are required to be unified
.
2.
Before starting the machine, you must use the crank handle to turn the machine to see if there is any abnormality in its rotation
.
3.
Whenever the machine is adjusted, the loosened screws must be tightened well, and the machine can be opened only after turning the machine with the crank handle to check whether its action meets the requirements
.
4.
When adjusting the machine, the tools should be used properly, and it is strictly forbidden to use too large tools or excessive force to remove the parts to avoid damage to the parts or affect the performance of the machine
.
5.
The machine must be kept clean.
It is strictly forbidden to have oil stains, liquid medicine or glass debris on the machine, so as to avoid damage to the machine.
Therefore, it is necessary to: ⑴ During the production process of the machine, remove the liquid medicine or glass debris in time
.
⑵Before the shift, all parts of the machine surface should be cleaned once, and clean lubricating oil should be added to each activity department
.
(3) It should be scrubbed once a week, especially the places that are not easy to be cleaned in ordinary use or blown with compressed air
.
