-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
-
Cosmetic Ingredient
- Water Treatment Chemical
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
The ethylene glycol cooling and heating machine should be placed in a room that meets the requirements.
The basic working principle is to stir the reaction in a closed container with a constant temperature under normal pressure or negative pressure to control the reflux and evaporation of the solution
.
1.
After opening the package, check whether the main accessories of the machine are complete according to the packing list; 2.
Assemble the frame with the stainless steel pipe and the fixing parts according to the drawings; 3.
Install the electrical box on the top of the right rear pole and tighten the screws, Plug in the plug and tighten the screws; 4.
Clean the installation, apply Vaseline to all interfaces to prevent the glass from locking up, and then apply vacuum grease to prevent air leakage; 5.
Press the universal wheel to fix it If the stirring is stable, it means that the debugging has been completed
.
Different heating and cooling sources can be used for cyclic heating or cooling reactions
.
Under the set constant temperature, the sealed glass reaction kettle can carry out stirring reaction under normal pressure or negative pressure according to the requirements of use, and can carry out reflux and distillation of the reaction solution.
It is a modern fine chemical and biopharmaceutical equipment
.
The liquid circulation of the whole Wuxi Guanethylene glycol cold and heat integrated machine is closed, and the system has an expansion vessel.
The expansion vessel and the liquid circulation are adiabatic.
It does not participate in the liquid circulation, but is only a mechanical connection.
When the medium temperature is lower than 60 degrees, no matter whether the temperature of the liquid circulation is high or low, there is no absorption of water vapor at low temperature, and no oil mist is generated at high temperature, so the heat transfer oil can work in a wide range of temperatures
.
The basic working principle is to stir the reaction in a closed container with a constant temperature under normal pressure or negative pressure to control the reflux and evaporation of the solution
.
1.
After opening the package, check whether the main accessories of the machine are complete according to the packing list; 2.
Assemble the frame with the stainless steel pipe and the fixing parts according to the drawings; 3.
Install the electrical box on the top of the right rear pole and tighten the screws, Plug in the plug and tighten the screws; 4.
Clean the installation, apply Vaseline to all interfaces to prevent the glass from locking up, and then apply vacuum grease to prevent air leakage; 5.
Press the universal wheel to fix it If the stirring is stable, it means that the debugging has been completed
.
Different heating and cooling sources can be used for cyclic heating or cooling reactions
.
Under the set constant temperature, the sealed glass reaction kettle can carry out stirring reaction under normal pressure or negative pressure according to the requirements of use, and can carry out reflux and distillation of the reaction solution.
It is a modern fine chemical and biopharmaceutical equipment
.
The liquid circulation of the whole Wuxi Guanethylene glycol cold and heat integrated machine is closed, and the system has an expansion vessel.
The expansion vessel and the liquid circulation are adiabatic.
It does not participate in the liquid circulation, but is only a mechanical connection.
When the medium temperature is lower than 60 degrees, no matter whether the temperature of the liquid circulation is high or low, there is no absorption of water vapor at low temperature, and no oil mist is generated at high temperature, so the heat transfer oil can work in a wide range of temperatures
.
