Inorganic phosphorus chemical pollutant emission standards have been reported for approval

Sinochem News reporter recently interviewed China Inorganic Salt Industry Association Deputy Secretary-General asked Li Ning learned that, on the basis of the integration of yellow phosphorus and several other phosphorus chemical products pollutant emission standards, a new "inorganic phosphorus chemical industry pollutant emission standards" has been reported for approval, according to the new standards of pollutant emission limits requirements, the difficulty of the existing large enterprises is not high, but small and medium-sized enterprises face a very heavy emission reduction taskca8
According to reports, on February 17, 2014, the Science and Technology Standards Division of the Ministry of Environmental Protection presided over a seminar on environmental standards system seisphers in the petroleum and chemical industry, and decided to combine the "Yellow Phosphorus Industrial Pollutant Emissions Standards", "Phosphate and Phosphorus Chemical Industry Pollutant Emissions Standards" and "Phosphorus Atmospheric Standards", which have been working, and to simultaneously cover water pollution emission limits, and to adjust them to a new comprehensive standard - the "Inorganic Phosphorus Chemical Industry Pollutant Emissions Standard" development tasksThe original several subject groups were merged and reconstituted as the new standards of the task force to carry out their workca8
Since then, the standard task group has comprehensively combed the previously issued tasks on phosphorus emission standards, formulated the outline, the industry's enterprise production situation has been comprehensively summarized combing, at the same time collected and collated the national laws and regulations on environmental protection and industrial development, standards and industrial policies, collected and understood foreign counterparts such as the United States, Western Europe, Japan and other places of relevant environmental standards and technology used, collected the relevant domestic adjacent industry pollutant emission standards and pollutant restrictions, prepared a review, prepared a new standardca8
In July 2014, the draft of the "Inorganic Phosphorus Chemical Industry Pollutant Emissions Standard" was published online for commentsFrom July to December 2014, the task force collected, collated and summarized the opinions solicited, formed the "National Environmental Protection Standards For Comments Summary Processing Table", and revised and improved the draft of the standards for comments, completed the "Inorganic Phosphorus Chemical Industry Pollutant Emissions Standard" draft, in February 2015 the standard submission and preparation notes reported to the Ministry of Environmental Protection, is currently in the state to be reviewedca8
It is understood that the standard included phosphorus chemical pollutants more comprehensiveAmong them, waste water discharge pollutants to control pH, suspension, COD, total phosphorus, monophosphate, total nitrogen, ammonia nitrogen, fluoride, cyanide, sulphide, total arsenic a total of 11 itemsTo prevent dilution of emissions, the standard also specifies the baseline drainage of the unit product The standard control of gas pollutants in yellow phosphorus enterprises is a total of 7 items of particulatematter, sulphides, sulfur dioxide, fluoride, gaseous total phosphorus, phosphorus pentoxide, arsenic and compounds, and 6 items of particulate matter, sulfur dioxide, fluoride, hydrogen chloride, phosphorus pentoxide, arsenic and compounds for other phosphorus chemicals In order to prevent dilution of emissions, the standard also provides for the baseline exhaust volume per unit of product, and sets emission limits for enterprise border monitoring points for unorganized discharges ca8 ca8 experts estimate that according to the domestic phosphorus chemical industry to meet the average requirements of the new standards, environmental protection investment accounted for about 5% to 7% of the total cost of plant investment, environmental protection operating costs accounted for about 1.5% to 3% of the total cost of production, the industry is expected to be fixed investment in waste gas and wastewater treatment of about 1.6 billion to 2 billion yuan, operating costs of about 260 million to 500 million yuan To meet the limits of the new standards, the industry's total wastewater emissions, fluoride, total phosphorus and COD emissions will be reduced by 54%, 77%, 92% and 70%, respectively, and emissions of sulphur dioxide, fluoride, particulates and phosphorus pentoxide will be reduced by 11.1%, 10.53%, 33.3% and 11.1%, respectively ca8
ca8 ca8 Sinochem News reporter recently interviewed China Inorganic Salt Industry Association Deputy Secretary-General asked Lining learned that, on the basis of the integration of yellow phosphorus and several other phosphorus chemical products pollutant emission standards, a new "inorganic phosphorus chemical industry pollutant emission standards" has been reported to be approved, according to the new standard sequester emission limits, the existing large enterprises are not difficult, but small and medium-sized enterprises face a very heavy emission reduction task ca8
　　According to reports, on February 17, 2014, the Science and Technology Standards Division of the Ministry of Environmental Protection presided over a seminar on environmental standards system seisphers in the petroleum and chemical industry, and decided to combine the "Yellow Phosphorus Industrial Pollutant Emissions Standards", "Phosphate and Phosphorus Chemical Industry Pollutant Emissions Standards" and "Phosphorus Atmospheric Standards", which have been working, and to simultaneously cover water pollution emission limits, and to adjust them to a new comprehensive standard - the "Inorganic Phosphorus Chemical Industry Pollutant Emissions Standard" development tasks The original several subject groups were merged and reconstituted as the new standards of the task force to carry out their work ca8
　　Since then, the standard task group has comprehensively combed the previously issued tasks on phosphorus emission standards, formulated the outline, the industry's enterprise production situation has been comprehensively summarized combing, at the same time collected and collated the national laws and regulations on environmental protection and industrial development, standards and industrial policies, collected and understood foreign counterparts such as the United States, Western Europe, Japan and other places of relevant environmental standards and technology used, collected the relevant domestic adjacent industry pollutant emission standards and pollutant restrictions, prepared a review, prepared a new standard ca8
　　In July 2014, the draft of the "Inorganic Phosphorus Chemical Industry Pollutant Emissions Standard" was published online for comments From July to December 2014, the task force collected, collated and summarized the opinions solicited, formed the "National Environmental Protection Standards For Comments Summary Processing Table", and revised and improved the draft of the standards for comments, completed the "Inorganic Phosphorus Chemical Industry Pollutant Emissions Standard" draft, in February 2015 the standard submission and preparation notes reported to the Ministry of Environmental Protection, is currently in the state to be reviewed ca8
　　It is understood that the standard included phosphorus chemical pollutants more comprehensive Among them, waste water discharge pollutants to control pH, suspension, COD, total phosphorus, monophosphate, total nitrogen, ammonia nitrogen, fluoride, cyanide, sulphide, total arsenic a total of 11 items To prevent dilution of emissions, the standard also specifies the baseline drainage of the unit product The standard control of gas pollutants in yellow phosphorus enterprises is a total of 7 items of particulatematter, sulphides, sulfur dioxide, fluoride, gaseous total phosphorus, phosphorus pentoxide, arsenic and compounds, and 6 items of particulate matter, sulfur dioxide, fluoride, hydrogen chloride, phosphorus pentoxide, arsenic and compounds for other phosphorus chemicals In order to prevent dilution of emissions, the standard also provides for the baseline exhaust volume per unit of product, and sets emission limits for enterprise border monitoring points for unorganized discharges ca8 ca8 experts estimate that according to the domestic phosphorus chemical industry to meet the average requirements of the new standards, environmental protection investment accounted for about 5% to 7% of the total cost of plant investment, environmental protection operating costs accounted for about 1.5% to 3% of the total cost of production, the industry is expected to be fixed investment in waste gas and wastewater treatment of about 1.6 billion to 2 billion yuan, operating costs of about 260 million to 500 million yuan To meet the limits of the new standards, the industry's total wastewater emissions, fluoride, total phosphorus and COD emissions will be reduced by 54%, 77%, 92% and 70%, respectively, and emissions of sulphur dioxide, fluoride, particulates and phosphorus pentoxide will be reduced by 11.1%, 10.53%, 33.3% and 11.1%, respectively ca8
ca8 ca8