Industry | Shandong: Strictly control volatile organic compounds in construction projects!

75em; text-indent: 2em;">Recently, Shandong Jinan Housing and Urban-Rural Development Bureau issued the "Notice on Implementing Volatile Organic Compounds (VOCs) Emission Reduction Measures in Construction Projects".
The notice puts forward four measures including strict source control of building materials selection, strict inspection of building materials entering the site, strict supervision and management of the construction process, and implementation of summer production control measures to strictly control volatile organic compounds in construction projects.

Recently, Shandong Jinan Housing and Urban-Rural Development Bureau issued the "Notice on Implementing Volatile Organic Compounds (VOCs) Emission Reduction Measures in Construction Projects".
The notice puts forward four measures including strict source control of building materials selection, strict inspection of building materials entering the site, strict supervision and management of the construction process, and implementation of summer production control measures to strictly control volatile organic compounds in construction projects.

75em; text-indent: 2em;">The following is the full text of the notice:

75em; text-indent: 2em;">The following is the full text of the notice:

The following is the full text of the notice:

75em; text-indent: 2em;">Notice on the implementation of volatile organic compounds (VOCs) emission reduction measures on construction sites

75em; text-indent: 2em;">District and County Housing Construction Bureau, Jinan High-tech Zone Natural Resources and Planning and Construction Administration, City Southern Mountain Management Committee Planning and Development Bureau, Jinan New and Old Kinetic Energy Conversion Pilot Zone Construction Management Department, Laiwu High-tech Zone Construction Administration, various survey and design units, maps Examination agencies, construction, supervision, and construction units:

75em; text-indent: 2em;">In order to win the battle to defend the blue sky and reduce the emission of volatile organic compounds (VOCs) from construction sites, in accordance with the "Jinan City Air Pollution Prevention and Control Action Plan in 2020" (Jiban Power Generation [2020] No.

4), "Jinan City Air Pollution Prevention and Control Key Points" Work Enhancement Measures" (Jibandiandian [2019] No.
47) and other documents stipulate that, in accordance with the actual situation of the city, the emission reduction measures of volatile organic compounds (VOCs) on construction sites are formulated as follows:

75em; text-indent: 2em;">Notice on the implementation of volatile organic compounds (VOCs) emission reduction measures on construction sites

Notice on the implementation of volatile organic compounds (VOCs) emission reduction measures on construction sites

75em; text-indent: 2em;">District and County Housing Construction Bureau, Jinan High-tech Zone Natural Resources and Planning and Construction Administration, City Southern Mountain Management Committee Planning and Development Bureau, Jinan New and Old Kinetic Energy Conversion Pilot Zone Construction Management Department, Laiwu High-tech Zone Construction Administration, various survey and design units, maps Examination agencies, construction, supervision, and construction units:

District and County Housing Construction Bureau, Jinan High-tech Zone Natural Resources and Planning and Construction Administration, City Southern Mountain Management Committee Planning and Development Bureau, Jinan New and Old Kinetic Energy Conversion Pilot Zone Construction Management Department, Laiwu High-tech Zone Construction Administration, various survey and design units, maps Examination agencies, construction, supervision, and construction units:

75em; text-indent: 2em;">In order to win the battle to defend the blue sky and reduce the emission of volatile organic compounds (VOCs) from construction sites, in accordance with the "Jinan City Air Pollution Prevention and Control Action Plan in 2020" (Jiban Power Generation [2020] No.

4), "Jinan City Air Pollution Prevention and Control Key Points" Work Enhancement Measures" (Jibandiandian [2019] No.
47) and other documents stipulate that, in accordance with the actual situation of the city, the emission reduction measures of volatile organic compounds (VOCs) on construction sites are formulated as follows:

In order to win the battle to defend the blue sky and reduce the emission of volatile organic compounds (VOCs) from construction sites, in accordance with the "Jinan City Air Pollution Prevention and Control Action Plan in 2020" (Jiban Power Generation [2020] No.
4), "Jinan City Air Pollution Prevention and Control Key Points" Work Enhancement Measures" (Jibandiandian [2019] No.
47) and other documents stipulate that, in accordance with the actual situation of the city, the emission reduction measures of volatile organic compounds (VOCs) on construction sites are formulated as follows:

75em; text-indent: 2em;">1.

Scope of application

75em; text-indent: 2em;">1.

Scope of application

75em; text-indent: 2em;">1.

Scope of application

1.
Scope of application

75em; text-indent: 2em;">The city's housing construction projects.

75em; text-indent: 2em;">The city's housing construction projects.

The city's housing construction projects.

75em; text-indent: 2em;">2.

Strict volatile organic compounds (VOCs) emission reduction measures

75em; text-indent: 2em;">2.
Strict volatile organic compounds (VOCs) emission reduction measures

75em; text-indent: 2em;">2.
Strict volatile organic compounds (VOCs) emission reduction measures

2.
Strict volatile organic compounds (VOCs) emission reduction measures

75em; text-indent: 2em;">(1) Strict source control of building materials selection

75em; text-indent: 2em;">1.
The VOCs content of the paint selected for the project should comply with the current national standards "Code for Indoor Environmental Pollution Control of Civil Construction Engineering" (GB50325), "Limits of Harmful Substances in Interior Decoration Materials and Interior Wall Coatings" (GB18582-2008) and "Construction The "Limit of Hazardous Substances in Exterior Wall Coatings" (GB24408-2009) and other relevant mandatory standards; from December 1, 2020, the "Limit of Hazardous Substances in Building Wall Coatings" (GB18582-2020, which replaces GB18582-2008 and GB24408-2009).
The VOCs content of the adhesive used in the project should comply with the current national standards "Limit of Hazardous Substances in Adhesives for Interior Decoration Materials" (GB18583), "Limit of Hazardous Substances in Construction Adhesives" (GB30982) and other relevant mandatory standards.

75em; text-indent: 2em;">2.
When preparing construction engineering design documents, the survey and design unit should follow the current national standards, and in accordance with the notification requirements of the "Beijing-Tianjin-Hebei 2018-2019 Comprehensive Air Pollution Control Action Plan", with reference to the implementation of Beijing, Tianjin, The "Volatile Organic Compound Content Limit Standard for Architectural Coatings and Adhesives" jointly issued by Hebei Province (DB13/3005-2017), preferentially select interior and exterior walls with low (no) VOCs content or main pollutant concentrations that meet the national mandatory standards Coatings, adhesives, and clearly indicate the VOCs content limit requirements.
It is strictly forbidden to select building materials that are prohibited by the state or province or listed in the elimination catalog.
The construction drawing review agency shall include the relevant requirements in the review scope, and strictly review and check the design drawings or documents in accordance with the requirements of the current relevant standards.

75em; text-indent: 2em;">3.
Encourage engineering projects to adopt new technologies, new processes, and new materials, and give priority to prefabricated building components and stereotyped, tool-based construction safety protection facilities; various steel structural components, cast iron pipes, welded steel pipes, etc.
that require anti-corrosion treatment are recommended to be concentrated Enter the site after the off-site anti-corrosion treatment is completed; use BIM technology to comprehensively arrange all kinds of pipelines and pipelines.
It is recommended that the pipeline supports are measured on-site, off-site processing, and enter the site after the anti-corrosion treatment is completed.
Encourage engineering projects to optimize the design of construction organization, reduce spraying and painting on the construction site, and reduce the emission of volatile organic compounds (VOCs) on the construction site.

75em; text-indent: 2em;">(2) Strictly check the entry point of building materials

75em; text-indent: 2em;">1.
The construction unit shall strictly control the procurement and quality inspections, and find that the coatings and adhesives that do not meet the current relevant standards and design requirements should be immediately requested to leave the site.

75em; text-indent: 2em;">2.
The construction and supervision units shall strengthen the inspection of coatings and adhesives when entering the site, conduct random inspections as required, and keep account records; strengthen follow-up self-inspection and inspections, and find that the coatings and adhesives that do not meet the requirements should be immediately withdrawn from the site and must not be used ; Incorporate whether to use qualified coatings and adhesives into the quality inspection and acceptance system of related parties, and the procedures that use unqualified materials will not be accepted.

75em; text-indent: 2em;">(3) Strict supervision and management of the construction process

75em; text-indent: 2em;">1.
It is strictly forbidden to spray paint in the open air at the construction site, and air pollutant collection and treatment measures must be taken for welding operations.

75em; text-indent: 2em;">2.
Standardize the management of construction site materials.
Coatings, adhesives, water-based treatment agents, thinners and solvents must be kept tightly closed; remaining materials after use should be sealed and stored in time, and waste materials should be cleared out in time; used waste containers should be recycled and disposed of in time, and should not be stored in the open air.

75em; text-indent: 2em;">3.
It is strictly forbidden to use organic solvents to clean construction tools indoors in construction projects.

75em; text-indent: 2em;">(4) Implementation of summer production control measures

75em; text-indent: 2em;">1.
The construction company should reasonably arrange the construction time of the project.
According to the environmental protection requirements, combined with the climate conditions of our city, formulate seasonal peak shift construction plans.
The construction procedures involving VOCs emissions should avoid the summer high temperature season from June to September as much as possible.

75em; text-indent: 2em;">2.
The VOCs discharge process implements peak-shift operation.
From June to September, the VOCS discharge process will be suspended from 10:00 to 17:00 every day (excluding rainy days).
Wall spraying, all kinds of pipelines and components anticorrosive spraying, fence spraying (brushing) paint, cutting and welding, etc.
are prohibited on the construction site Construction operations that easily produce volatile organic compounds.

75em; text-indent: 2em;">(1) Strict source control of building materials selection

(1) Strict source control of building materials selection

75em; text-indent: 2em;">1.
The VOCs content of the paint selected for the project should comply with the current national standards "Code for Indoor Environmental Pollution Control of Civil Construction Engineering" (GB50325), "Limits of Harmful Substances in Interior Decoration Materials and Interior Wall Coatings" (GB18582-2008) and "Construction The "Limit of Hazardous Substances in Exterior Wall Coatings" (GB24408-2009) and other relevant mandatory standards; from December 1, 2020, the "Limit of Hazardous Substances in Building Wall Coatings" (GB18582-2020, which replaces GB18582-2008 and GB24408-2009).
The VOCs content of the adhesive used in the project should comply with the current national standards "Limit of Hazardous Substances in Adhesives for Interior Decoration Materials" (GB18583), "Limit of Hazardous Substances in Construction Adhesives" (GB30982) and other relevant mandatory standards.

1.
The VOCs content of the paint selected for the project should comply with the current national standards "Code for Indoor Environmental Pollution Control of Civil Construction Engineering" (GB50325), "Limits of Harmful Substances in Interior Decoration Materials and Interior Wall Coatings" (GB18582-2008) and "Construction The "Limit of Hazardous Substances in Exterior Wall Coatings" (GB24408-2009) and other relevant mandatory standards; from December 1, 2020, the "Limit of Hazardous Substances in Building Wall Coatings" (GB18582-2020, which replaces GB18582-2008 and GB24408-2009).
The VOCs content of the adhesive used in the project should comply with the current national standards "Limit of Hazardous Substances in Adhesives for Interior Decoration Materials" (GB18583), "Limit of Hazardous Substances in Construction Adhesives" (GB30982) and other relevant mandatory standards.

75em; text-indent: 2em;">2.
When preparing construction engineering design documents, the survey and design unit should follow the current national standards, and in accordance with the notification requirements of the "Beijing-Tianjin-Hebei 2018-2019 Comprehensive Air Pollution Control Action Plan", with reference to the implementation of Beijing, Tianjin, The "Volatile Organic Compound Content Limit Standard for Architectural Coatings and Adhesives" jointly issued by Hebei Province (DB13/3005-2017), preferentially select interior and exterior walls with low (no) VOCs content or main pollutant concentrations that meet the national mandatory standards Coatings, adhesives, and clearly indicate the VOCs content limit requirements.
It is strictly forbidden to select building materials that are prohibited by the state or province or listed in the elimination catalog.
The construction drawing review agency shall include the relevant requirements in the review scope, and strictly review and check the design drawings or documents in accordance with the requirements of the current relevant standards.

2.
When preparing construction engineering design documents, the survey and design unit should follow the current national standards, and in accordance with the notification requirements of the "Beijing-Tianjin-Hebei 2018-2019 Comprehensive Air Pollution Control Action Plan", with reference to the implementation of Beijing, Tianjin, The "Volatile Organic Compound Content Limit Standard for Architectural Coatings and Adhesives" jointly issued by Hebei Province (DB13/3005-2017), preferentially select interior and exterior walls with low (no) VOCs content or main pollutant concentrations that meet the national mandatory standards Coatings, adhesives, and clearly indicate the VOCs content limit requirements.
It is strictly forbidden to select building materials that are prohibited by the state or province or listed in the elimination catalog.
The construction drawing review agency shall include the relevant requirements in the review scope, and strictly review and check the design drawings or documents in accordance with the requirements of the current relevant standards.

75em; text-indent: 2em;">3.
Encourage engineering projects to adopt new technologies, new processes, and new materials, and give priority to prefabricated building components and stereotyped, tool-based construction safety protection facilities; various steel structural components, cast iron pipes, welded steel pipes, etc.
that require anti-corrosion treatment are recommended to be concentrated Enter the site after the off-site anti-corrosion treatment is completed; use BIM technology to comprehensively arrange all kinds of pipelines and pipelines.
It is recommended that the pipeline supports are measured on-site, off-site processing, and enter the site after the anti-corrosion treatment is completed.
Encourage engineering projects to optimize the design of construction organization, reduce spraying and painting on the construction site, and reduce the emission of volatile organic compounds (VOCs) on the construction site.

3.
Encourage engineering projects to adopt new technologies, new processes, and new materials, and give priority to prefabricated building components and stereotyped, tool-based construction safety protection facilities; various steel structural components, cast iron pipes, welded steel pipes, etc.
that require anti-corrosion treatment are recommended to be concentrated Enter the site after the off-site anti-corrosion treatment is completed; use BIM technology to comprehensively arrange all kinds of pipelines and pipelines.
It is recommended that the pipeline supports are measured on-site, off-site processing, and enter the site after the anti-corrosion treatment is completed.
Encourage engineering projects to optimize the design of construction organization, reduce spraying and painting on the construction site, and reduce the emission of volatile organic compounds (VOCs) on the construction site.

75em; text-indent: 2em;">(2) Strictly check the entry point of building materials

(2) Strictly check the entry point of building materials

75em; text-indent: 2em;">1.
The construction unit shall strictly control the procurement and quality inspections, and find that the coatings and adhesives that do not meet the current relevant standards and design requirements should be immediately requested to leave the site.

1.
The construction unit shall strictly control the procurement and quality inspections, and find that the coatings and adhesives that do not meet the current relevant standards and design requirements should be immediately requested to leave the site.

75em; text-indent: 2em;">2.
The construction and supervision units shall strengthen the inspection of coatings and adhesives when entering the site, conduct random inspections as required, and keep account records; strengthen follow-up self-inspection and inspections, and find that the coatings and adhesives that do not meet the requirements should be immediately withdrawn from the site and must not be used ; Incorporate whether to use qualified coatings and adhesives into the quality inspection and acceptance system of related parties, and the procedures that use unqualified materials will not be accepted.

2.
The construction and supervision units shall strengthen the inspection of coatings and adhesives when entering the site, conduct random inspections as required, and keep account records; strengthen follow-up self-inspection and inspections, and find that the coatings and adhesives that do not meet the requirements should be immediately withdrawn from the site and must not be used ; Incorporate whether to use qualified coatings and adhesives into the quality inspection and acceptance system of related parties, and the procedures that use unqualified materials will not be accepted.

75em; text-indent: 2em;">(3) Strict supervision and management of the construction process

(3) Strict supervision and management of the construction process

75em; text-indent: 2em;">1.
It is strictly forbidden to spray paint in the open air at the construction site, and air pollutant collection and treatment measures must be taken for welding operations.

1.
It is strictly forbidden to spray paint in the open air at the construction site, and air pollutant collection and treatment measures must be taken for welding operations.

75em; text-indent: 2em;">2.
Standardize the management of construction site materials.
Coatings, adhesives, water-based treatment agents, thinners and solvents must be kept tightly closed; remaining materials after use should be sealed and stored in time, and waste materials should be cleared out in time; used waste containers should be recycled and disposed of in time, and should not be stored in the open air.

2.
Standardize the management of construction site materials.
Coatings, adhesives, water-based treatment agents, thinners and solvents must be kept tightly closed; remaining materials after use should be sealed and stored in time, and waste materials should be cleared out in time; used waste containers should be recycled and disposed of in time, and should not be stored in the open air.

75em; text-indent: 2em;">3.
It is strictly forbidden to use organic solvents to clean construction tools indoors in construction projects.

3.
It is strictly forbidden to use organic solvents to clean construction tools indoors in construction projects.

75em; text-indent: 2em;">(4) Implementation of summer production control measures

(4) Implementation of summer production control measures

75em; text-indent: 2em;">1.
The construction company should reasonably arrange the construction time of the project.
According to the environmental protection requirements, combined with the climate conditions of our city, formulate seasonal peak shift construction plans.
The construction procedures involving VOCs emissions should avoid the summer high temperature season from June to September as much as possible.

1.
The construction company should reasonably arrange the construction time of the project.
According to the environmental protection requirements, combined with the climate conditions of our city, formulate seasonal peak shift construction plans.
The construction procedures involving VOCs emissions should avoid the summer high temperature season from June to September as much as possible.

75em; text-indent: 2em;">2.
The VOCs discharge process implements peak-shift operation.
From June to September, the VOCS discharge process will be suspended from 10:00 to 17:00 every day (excluding rainy days).
Wall spraying, all kinds of pipelines and components anticorrosive spraying, fence spraying (brushing) paint, cutting and welding, etc.
are prohibited on the construction site Construction operations that easily produce volatile organic compounds.

2.
The VOCs discharge process implements peak-shift operation.
From June to September, the VOCS discharge process will be suspended from 10:00 to 17:00 every day (excluding rainy days).
Wall spraying, all kinds of pipelines and components anticorrosive spraying, fence spraying (brushing) paint, cutting and welding, etc.
are prohibited on the construction site Construction operations that easily produce volatile organic compounds.

75em; text-indent: 2em;">3.
Strengthen supervision and management measures

75em; text-indent: 2em;">3.
Strengthen supervision and management measures

75em; text-indent: 2em;">3.
Strengthen supervision and management measures

75em; text-indent: 2em;">3.
Strengthen supervision and management measures

75em; text-indent: 2em;">3.
Strengthen supervision and management measures

75em; text-indent: 2em;">3.
Strengthen supervision and management measures

3.
Strengthen supervision and management measures

75em; text-indent: 2em;">The municipal and district housing construction departments and the engineering quality and safety supervision agencies at all levels should strengthen the supervision of the emission reduction of volatile organic compounds (VOCs) on construction sites, and include the implementation of the emission reduction measures of volatile organic compounds (VOCs) in the construction in progress.
Project supervision and inspection content, legislative reform issues require the project to be corrected on the spot, and those with more problems shall be ordered to rectify within a time limit, and those who refuse to rectify shall be suspended for rectification, notified of criticism or transferred to administrative penalties, and credit penalties shall be implemented in accordance with relevant regulations.

75em; text-indent: 2em;">The municipal and district housing construction departments and the engineering quality and safety supervision agencies at all levels should strengthen the supervision of the emission reduction of volatile organic compounds (VOCs) on construction sites, and include the implementation of the emission reduction measures of volatile organic compounds (VOCs) in the construction in progress.
Project supervision and inspection content, legislative reform issues require the project to be corrected on the spot, and those with more problems shall be ordered to rectify within a time limit, and those who refuse to rectify shall be suspended for rectification, notified of criticism or transferred to administrative penalties, and credit penalties shall be implemented in accordance with relevant regulations.

The municipal and district housing construction departments and the engineering quality and safety supervision agencies at all levels should strengthen the supervision of the emission reduction of volatile organic compounds (VOCs) on construction sites, and include the implementation of the emission reduction measures of volatile organic compounds (VOCs) in the construction in progress.
Project supervision and inspection content, legislative reform issues require the project to be corrected on the spot, and those with more problems shall be ordered to rectify within a time limit, and those who refuse to rectify shall be suspended for rectification, notified of criticism or transferred to administrative penalties, and credit penalties shall be implemented in accordance with relevant regulations.