-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
-
Cosmetic Ingredient
- Water Treatment Chemical
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
Capsule counting machine is suitable for pharmaceutical, food, chemical, and other industries.
It can automatically enter bottles, count and fill products such as tablets (plain tablets, sugar-coated tablets), capsules, and pills.
It can also be connected to the next process.
It has the advantages of beautiful appearance, novel structure, convenient adjustment, suitable for production and use of various specifications, etc.
It is an ideal multi-piece packaging equipment
.
The precautions for the use of the capsule counting machine are as follows: 1.
The capsules must be completely locked, the length is uniform, and there must be no unqualified capsules
.
2.
Capsules deformed after being damp should not be counted in this machine
.
3.
Do not press the micro switch when the capsules in the several holes are not full, otherwise the capsules will be damaged when turning to the position of the retaining ring
.
When the capsules in the several holes are not completely filled, the capsules can be brushed with a brush, so that there are capsules in the several holes
.
4.
The height of the counting plate should be the same as the length of the capsule or the head of the capsule should be slightly higher than the counting plate.
It should not be too low or too high, otherwise the capsule will be damaged when it is rotated.
Part and make the middle hole into the discarded video disc after matching the shaft.
If it is too high, please use a lathe to process the washer under the disc (do not make it too low)
.
5.
The counting tray must not be under heavy pressure, otherwise it will not work normally; when lifting the machine, it cannot be lifted on the counting tray, otherwise the counting tray will be loose and damaged
.
6.
The retaining ring on the counting plate must be adjusted to a suitable height.
The bottom edge should be kept at a distance of about 1.
5-2MM from the head of the capsule.
If it is too low or too high, the capsule will be damaged
.
