How water bath oscillators prevent rust

Generally such as the water bath thermostatic oscillator, our shell is the use of electrostatic spray molding technology, under normal circumstances can effectively eliminate rust, but in the strong corrosion environment, the effect will be weakened, so we recommend that this environment or use all stainless steel material, and then the sink, the sink we use is all stainless steel material, in this case, the rust capacity will be weakened, but stainless steel is not not rusty, but more corrosion resistant than the general metal, Therefore, after the experiment, we should empty the working water in the sink and dry
it in a ventilated place as soon as possible.

In addition, human sweat will also cause equipment to rust, because sweat is a colorless transparent or pale yellow with a salty taste of weak acidity of the liquid, its pH value of 5 ~ 6, in addition to containing sodium, potassium, calcium, magnesium salts, but also contains a small amount of urea, lactic acid, citric acid and other organic acids
.

When sweat comes into contact with metal, a sweat film is formed on the surface of the metal, which causes electrochemical effects on the metal and corrodes the metal
.

People sweating is inevitable, to prevent hand sweat caused by rust, production personnel or experimental personnel should wear gloves, finger sleeves, or use tools to take parts, do not casually touch the product
with hand.

Let's talk about the simple method of applying anti-rust oil: 1) Soaking method: Some small items use the method
of soaking in anti-rust grease and letting its surface adhere to a layer of anti-rust grease.

The thickness of the oil film can be achieved
by controlling the temperature or viscosity of the anti-rust grease.

2) The brushing method is used for outdoor construction equipment or special shape products that are not suitable for soaking or spraying, and it is necessary to pay attention to not piling up when brushing, and also to prevent leakage of coating
.

3) Spray method Some large rust inhibitors can not be oiled by soaking method, generally with about 0.
7Mpa pressure of filtered compressed air in a clean air place for spraying
.

The spray method is suitable for solvent dilution type anti-rust oil or thin layer anti-rust oil, but it must adopt perfect fire and labor protection measures
.

Any metal in the case of poor protection is good to produce rust phenomenon, I think as long as we protect well, to do anti-micro-gradual, we can make ordinary equipment play a good role
.