-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
-
Cosmetic Ingredient
- Water Treatment Chemical
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
The automatic sampling tube filling and capping machine is for filling and capping of small dose reagent tubes, and peristaltic pump filling.
The imported cam divider provides precise workstations to ensure the accuracy of filling and capping.
Caps, screw caps and three-claw pneumatic screw caps have stable operation and reasonable design.
They are made of SUS304 and 316L stainless steel, and fully meet the requirements of the new version of GMP.
They are reagent filling equipment for pharmaceutical industry and hospital preparations
.
The following is the use method of this equipment: 1.
Put the plastic bottle to be filled into the bottle shaker, the bottle is arranged by the track of the shaker, and the tube is turned vertically into the host turntable mold
.
2.
Put the glass bottle into the bottle feeding carousel, and the bottle will automatically transfer to the bottle feeding conveyor belt with the rotation of the carousel
.
3.
The bottle detection sensor of the reagent filling machine detects whether there is a bottle in the station, and the detection signal is sent to the internal control system to control the filling with a bottle or no bottle without a bottle.
4.
If a bottle is detected in the front, the machine starts filling
.
5.
Lower the cap
.
6.
Tighten the cap
.
7.
The product with the cover pressed takes the initiative to walk out of the station
.
