How to solve the problem of slurry vibrating screen jumping

The slurry vibrating screen is a special vibrating screening equipment for the slurry screening Because the slurry usually has a certain viscosity, the slurry vibrating screen has enough vibrating screen force to ensure the working efficiency and screening effect of the slurry vibrating screen Commonly used to slurry vibrating screen models are: three-dimensional rotary vibrating screen, less ultrasonic vibration, filter screen, etc However, in the actual production process, the problem of slurry skipping occasionally occurs, so what causes the problem? How to solve it? Next, jinjiashun vibration editor makes analysis and solutions to these problems The reason analysis and solution of the slurry jumping of the liquid vibrating screen: 1 The diameter of the screen surface of the equipment is too large In the production process, the bigger the equipment is, the better, but it needs to be selected according to the actual production demand If the diameter of the screen surface of the equipment is too large, the slurry material will jump into the screen surface This is because different sizes of equipment need to match the corresponding power of the vibration motor to drive, and the production of slurry materials is generally not too large, so once the equipment size is used too large, it will cause the problem of slurry skipping For this problem, it is suggested that when selecting the slurry vibrating screen, please select the appropriate size of equipment reasonably according to the actual production requirements, so as to effectively avoid the occurrence of slurry skipping and save the cost of equipment procurement II The grid structure used does not conform to the production of slurry materials The screening equipment for slurry materials is mostly circular vibrating screen The grid structure of the equipment can be divided into old pine grid, sub parent grid and adhesive grid For example, in the slurry production process, when the grid structure uses the old pine type or the sub grid structure, the slurry skipping problem will occur This is because the old loose type and the mesh structure of the sub main network will have the problem of slurry jumping when the slurry materials are screened due to the strong impact of the cleaning device In order to solve this problem, it is suggested to use adhesive grid structure for production The adhesive grid structure will be close to the screen frame to a large extent, which can prevent the leakage of the slurry material in the horizontal run, and because the impact force of the cleaning device used in the adhesive grid is soft, it will not cause the slurry material to jump The above is the reason and solution of slurry jumping in the production of slurry shale shaker If you encounter other problems in the use process, you can consult our online customer service