How to operate the TCU-multiple reactor refrigeration and heating temperature control system

The high temperature of Wuxi Guanya TCU-multiple reaction kettle refrigeration and heating temperature control system can reach 200 degrees Celsius, and the low temperature is minus 80 degrees Celsius.
There are many important things to pay attention to during its use.
Among them, how to add liquid after starting is A very important operational issue
.

When connecting the power supply to the TCU-multiple reactor refrigeration and heating temperature control system, it is necessary to pay attention to whether the single-phase power and two-phase power are connected correctly, whether the power consumption used is too large, whether the electrical equipment is overloaded, and whether the TCU-multiple reaction The kettle refrigeration and heating temperature control system needs to avoid these problems
.

In the event of an overload situation, it is necessary to immediately shut down the instruments and equipment that are not required for the current experiment
.

At the same time, it is necessary to check whether the fire protection, security work and grounding equipment are in place to avoid accidents
.

Evacuation and heating in the refrigeration and heating temperature control system of TCU-multiple reactors is its basic operation, which needs to be operated together with liquid addition and evacuation.
The liquid addition port is located on the top of the machine and needs to be closed clockwise and opened counterclockwise.
The air valve is on the side, and it needs to insert empty auxiliary equipment.
It is closed clockwise and opened counterclockwise to avoid damage to the circulating pump model
.

At the same time, you also need to pay attention to your own protective measures, wear a series of protective tools, such as gloves, goggles, etc.
, you need to check the condition of the medium to ensure that it is non-corrosive, non-colored and non-precipitating
.

When adding liquid to the TCU-multiple reactor refrigeration heating temperature control system, it is necessary to refer to the position indication of the liquid level tank, do not add too much or too little, and consider thermal expansion and cold contraction
.

When adding liquid, pay attention to when adding liquid, open the sealing cover of the filling port counterclockwise, insert the funnel to dump the heat transfer medium, add the liquid to the liquid level to expand the liquid level, open the exhaust valve counterclockwise, and empty the liquid click Settings
.

Prepare the Drain button on the touchscreen main control page
.

Enclosure protection devices are required at the entrance and exit of the equipment
.

The circulating medium of the TCU-multiple reactors refrigeration heating temperature control system integral machine is heat transfer oil
.

Due consideration should be given to oil leakage and flammability
.

In addition, it should be observed regularly
.

The condition of the heat transfer oil, if convergence occurs, should be changed in time
.

It is strictly forbidden to add booster pumps or other pumps in the system, and it is not allowed to modify without permission.
If there is a failure, we can contact our technicians to help solve the problem
.