How to make the temperature automatic control of the reactor more stable

According to the characteristics of reactor temperature control, the temperature of the reactor based on PID control is automatically controlled, which makes the constant temperature control of the reactor more stable
.

1.
The automatic temperature control of the reactor has automatic temperature sensing function
.

The controller accurately adjusts according to the detected temperature and the set temperature value to achieve the purpose of controlling the
temperature.

The entire process of detection and adjustment is automatically controlled and the integrated device is easy to use
.

2.
For some occasions with high noise requirements, according to the conditions of the machine itself, a layer of silencer can be added to meet the noise requirements
of the scene.

Rubber buffer adhesive can be used to withstand the weight of the reactor temperature cycle control device, especially the high-power reactor temperature cycle control device, which is indispensable
.

3, for some occasions where there are requirements for noise, a suppressor can be installed to reduce the noise, in general, the eliminator is installed at the end
of the air inlet pipe or outlet pipe.

Flat washers and spring washers are used to tighten the screws
.

4.
When using sound-deadening cotton, pay attention to the distance between the fan and the box, pay attention to the ventilation and heat dissipation of the fan, and pay attention to the use of rubber buffer glue to bear the weight
of the equipment.

5.
The reactor temperature circulation control device will have the corresponding installation instructions and instructions for use attached to the factory, and the user can install and use
them in accordance with the instructions.

6.
The automatic temperature control of the reactor adopts the self-tuning PID algorithm, which can be applied to various environments and various equipment, and the temperature control accuracy is high
.

The device has a temperature correction function, which is more accurate
than ordinary thermostat temperature measurement.

Eye-catching control panel for quick and easy operation
.

7.
When the refrigeration is dropped from high temperature to low temperature, the refrigeration can be directly started, continuous work, temperature control, accelerate the progress of the experiment, save resources, and improve work efficiency
.

The refrigeration heat exchanger adopts plate heat exchanger, which occupies little space and has high
heat exchange efficiency.

The circulation pump is a high-temperature oil pump, which has the advantages of
high temperature resistance, low noise and large flow rate.