How to maintain the spray filling machine

The spray filling machine is improved, optimized and integrated from the original semi-automatic aerosol filling machine
.

Three semi-automatic filling, sealing and inflating machines are installed on different workbenches
.

Fast speed, high precision, good stability, time-saving and labor-saving, it is an ideal choice for small and medium-sized aerosol manufacturers
.

The spray filling machine has a high degree of automation.
The default configuration is man-machine interface operation, PLC control, frequency converter stepless speed change, and servo system filling (no bottle, no filling, no cap)
.

With modular design, each equipment of the production line can be individually controlled and fully automated
.

The electronic components are all domestic and foreign brands of Zhiming, the contact material is stainless steel 304, the core components such as the filling pump, and the material tank are stainless steel 316
.

The main methods for maintaining the spray filling machine are as follows: First, the spray filling machine must first rotate the machine with the crank handle to see if there is any abnormality in its rotation, and it can be confirmed that it is normal before driving
.

When adjusting the machine, the tools should be used properly, and it is strictly forbidden to use too large tools or excessive force to disassemble the parts to avoid damaging the parts or affecting the performance of the machine
.

Second, whenever the machine is adjusted, be sure to tighten the loosened screws, and use the crank handle to turn the machine to see if its action meets the requirements before driving
.

The machine must be kept clean, and it is strictly forbidden to have oil stains, liquid medicine or glass debris on the machine, so as to avoid damage to the machine.
Therefore, it is necessary to remove the liquid medicine or glass debris in time during the production process of the machine
.

 　　Third, all parts of the surface of the machine should be cleaned once before the shift, and clean lubricating oil should be added to each activity department
.

It should be scrubbed once a week, especially the places that are not easy to be cleaned in ordinary use or blown with compressed air
.

 　　Fourth, after the machine is unpacked, first check whether the random technical data is complete and whether the machine is damaged during transportation, so as to solve it in time
.

Install and adjust the feed assembly and discharge assembly according to the outline diagrams in this manual
.

Fill each lubrication point with new oil
.

Use the crank handle to turn the machine to check whether the machine is running in the correct direction, and the machine must be protected and grounded
.

 　　The spray filling machine can fill the propellant or compressed air while sealing the valve with the pouch, and then inject the liquid raw material into the pouch using high pressure
.

The raw material and the tank body can be completely isolated, thereby solving the trouble caused by the raw material corroding the tank body or the incompatibility of gas and liquid
.

In addition, its pump body is generally made of various corrosion-resistant materials.
The pump body is separated from the motor.
There are no mechanical metal parts and no wear in the pump body.
It combines the advantages of self-priming pumps and chemical pumps.
The advantages of corrosion resistance and thermal protection, continuous idling and continuous load operation for a long time
.