How to install the casters of the high and low temperature refrigeration and heating circulation system

The high and low temperature refrigeration and heating cycle system can provide a heat source or a cold source circulation device with a wide range of work, which can be used in pharmaceutical, chemical, biological and other industries to provide heat and cold sources for reactors
.


1.
When moving: Rotate the lift turntable clockwise, lift the fixed base upwards, turn the lift turntable at each wheel to make the fixed base of each wheel off the ground, ensure that all moving rollers are convenient for moving equipment, and reach the ideal position
.

2.
When fixing: move the box to the desired position and lower it counterclockwise, and raise the moving roller to make the fixed base contact the ground to make it basically fixed
.

At this time, a spirit level is used to measure whether the equipment is level
.

The height of each part of the shell can be adjusted by lifting the mold, and each part can be adjusted to a suitable position to stop the rotation, so as to ensure the level of the device
.

The casters of the high and low temperature refrigeration and heating circulation system are also an important part of the unit, and for many people, they may feel that their importance may be insignificant
.

Whether the equipment casters are normal or not has a great influence on the normal operation of the device
.

The casters of the high and low temperature refrigeration and heating cycle system usually include movable casters and fixed casters, and the movable casters are also called universal casters, and their structure allows 360-degree rotation; the fixed casters, also known as directional casters, have no rotating structure and cannot be rotated.
turn
.

The two kinds of casters are generally used in combination.
For example, the structure of the trolley is two directional wheels in the front, and two universal wheels on the rear side near the push armrest
.

In terms of installation height, the caster refers to the vertical distance of the device from the ground to the installation position of the equipment, and the installation height of the caster refers to the larger vertical distance between the bottom plate and the rim of the caster
.

During the operation of the device, it must be fixed as necessary
.