-
Categories
-
Pharmaceutical Intermediates
-
Active Pharmaceutical Ingredients
-
Food Additives
- Industrial Coatings
- Agrochemicals
- Dyes and Pigments
- Surfactant
- Flavors and Fragrances
- Chemical Reagents
- Catalyst and Auxiliary
- Natural Products
- Inorganic Chemistry
-
Organic Chemistry
-
Biochemical Engineering
- Analytical Chemistry
-
Cosmetic Ingredient
- Water Treatment Chemical
-
Pharmaceutical Intermediates
Promotion
ECHEMI Mall
Wholesale
Weekly Price
Exhibition
News
-
Trade Service
Constant temperature and humidity test chamber in the manufacturing technology and the use of different operations, more or less lead to some noise generation
.
So, what are the methods that can effectively reduce the noise of the constant temperature test chamber? 1.
Check whether there is any accumulated debris at the top of the box The top of the constant temperature and humidity test chamber can not accumulate debris, because the resonance will cause noise
.
2.
Check whether the compressor is faulty The top of the hand compressor, the noise is not weakened, usually due to the noise caused by the noise caused by the large gap between the piston rod and the cylinder in the compressor, which requires the compressor
to be replaced.
When the test chamber does not open the door, the distance is about 3m, and it is obvious that the sound of opening the pot and the intermittent humming sound are heard, which is that the refrigeration pipeline is faulty, and it is necessary to find a technician for maintenance
.
3.
Vulcanized rubber block to reduce pipe vibration During operation, the noise is larger, and the outer tire of the unwanted bicycle can be cut into a diameter of 30mm round, and the diameter of about 5mm is cut out of the middle, and the outer to the center is cut to the center in order to stick the vulcanized rubber to the inner tube
.
