How to detect lipstick and lipstick hardness breaking force

Lipstick and lipstick are one of the essential cosmetic products for women They can make the lips rosy and glossy, add facial beauty and modify the products of lip contour But sometimes the strength of users is too large, which leads to the breaking of lipstick, so the breaking force index of lipstick is not regulated by relevant national standards, but many enterprises use lipstick breaking force tester to test the product quality in the production process, establish internal quality control standards, and ensure that lipstick has reasonable bending, breaking, breaking or breaking force value in the use process The lipstick breaking instrument developed by Ji'nan San Quan Zhong Shi Experimental Instrument Co., Ltd (also known as lipstick breaker, lipstick breaking tester, etc.) can detect the breaking force value of lipstick, lipstick and eyebrow pencil It adopts fully automated operation and fast test speed to meet the testing needs of cosmetics factories and help enterprises establish and improve the internal quality control system The following is a brief introduction to the lipstick and lipstick hardness breaking experimental solution Lipstick, lipstick breaking force testing instrument lipstick, lip balm hardness breaking force how to test? First, Xiaobian first introduces the working principle of the lipstick breaker: the test sample is clamped between two chuck heads of the lipstick break tester, and the two chuck performs relative motion, and the bottle neck is separated from the flat body by special collet Test the change of force value and displacement in the process through the sensor of breaking force instrument, so as to obtain the corresponding force value data Test steps: (1) turn on the power, turn on the switch, and press the [switch] key to enter the test interface (2) Press the [switch] key to enter the parameter setting interface, change the running speed to 10 mm / min, the action mode to automatic, and the return speed to 100 mm / min; (3) press the [switch] key to return to the test interface; (4) press the [up] or [down] key to raise and lower the pressure bar to the appropriate position (5) Place the prepared sample on the test support, fine tune the position of the sample, and align the compression bar with the bottleneck of the sample, Cover the protective cover well; (6) press the [clear] key to clear the force value and displacement of the test interface, and then press the [delete] key to clear the previous test results; (7) press the [drop] key, the pressure bar will drop at a speed of 10 mm / min at a constant speed, apply pressure to the sample, and separate the bottleneck of the sample from the bottle body (8) After the sample is broken, the pressure bar returns to the initial position at the speed of 100mm / min, and the test interface displays "stop", and the test of the sample is finished; (9) replace the sample, repeat steps 5-8; (10) after the test, press the [Print] key to print the test results Note: when it is necessary to print the results of a single group, you can print the results after the completion of a single group of tests, then delete the information, and continue to the next group of tests; you can also click the [results] key in the test interface to enter the result interface, turn the page to query the history, and then print the data of the current single group         Jinan Sanquan Zhongshi Experimental Instrument Co., Ltd (registered brand: sumspring Sanquan Zhongshi), is a high-tech innovation enterprise focusing on the research and development and sales of laboratory analytical and testing instruments Founded in 2007, the company focuses on providing scientific packaging material testers for quality inspection and drug inspection system, food industry, drug industry, packaging and printing industry, adhesive industry, home appliance industry, etc And total quality control solutions.