How to control the temperature of the silicone oil heating hot and cold circulation device

The application range of silicone oil heating cold and hot circulation device is becoming more and more extensive, especially suitable for the use of reaction equipment such as reactors, reactors, reaction tanks, etc.
, to provide the high and low temperatures
required for reaction 。 So do you know how it does the temperature control work? When the silicone oil heating cold and heat circulation device connected to the reactor or other reactors for temperature control, the whole process may produce a certain chemical reaction to generate heat when the high temperature experiment is carried out, so it is easy to be affected by the external temperature, so the placement environment is also very important, if the room temperature is too high or too many obstacles around the equipment will cause the operating efficiency of the equipment to decrease, it is recommended that we choose a well-ventilated room temperature normal environment to install equipment
。 When the reactor supporting the silicone oil heating hot and cold circulation device for polymerization reaction, there will be a series of exothermic reactions and endothermic reactions, in the chemical reaction, it is recommended that the operator should not be too close, so as not to cause trouble
.
During the reaction, if the heat is not discharged in time, it will affect the pressure of the reaction, and if the pressure is too high, it will make the entire reaction in a dangerous state
.
In the silicone oil heating cold and heat circulation device, can be matched with different volumes of the reactor for refrigeration heating temperature control, due to the different size of the reactor heat capacity generated by the difference, therefore, its heat absorption or exothermic capacity is also different, therefore, the selection needs to provide accurate reactor size, temperature requirements, material conditions and other conditions for the experimental equipment heating cooler selection, to avoid the selection of too large or too small equipment can not reach the temperature and power required for the production experiment and other situations
.